11 material differences · fewer than 12
Tractor oneFendt Favorit 610 LS1978–1984No measured PTO figureTractor twoVALMET 903/903-41979–1983No measured PTO figure
Which should you choose?
Read our verdict on the Favorit 610 LS and the 903/903-4 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
11 material differences · 3 fields identical or within 5%, which is not counted as material
| Field | Favorit 610 LS | 903/903-4 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 93.2 hp | 92.7 hp | — |
| Engine declared | MWM D 227.6.2 | VALMET 411 CS | differs |
| Displacement declared | 5.65 L | 4.40 L | +29% Favorit 610 LS |
| Maximum torque declared | 260 lb·ft · 352 N·m | 236 lb·ft · 320 N·m | +10% Favorit 610 LS |
| Transmission | |||
| Top speed declared | 18.6 mph · 30 km/h | 18.6 mph · 30 km/h | — |
| Clutch declared | hydraulically operated dry clutch | — | — |
| Hydraulics & hitch | |||
| Pump flow declared | 11.5 gpm · 43.7 L/min | 11.4 gpm · 43.0 L/min | — |
| Pressure declared | 2,538 psi · 175 bar | — | — |
| Rear PTO speeds declared | 540/1000 rpm | 540 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 10,880 lb · 4,935 kg | 8,047 lb · 3,650 kg | +35% Favorit 610 LS |
| Wheelbase declared | 109.6 in · 2,783 mm | 91.7 in · 2,330 mm | +19% Favorit 610 LS |
| Length declared | 185.0 in · 4,700 mm | 153.7 in · 3,905 mm | +20% Favorit 610 LS |
| Width declared | 86.8 in · 2,204 mm | 77.6 in · 1,972 mm | +12% Favorit 610 LS |
| Ground clearance declared | 16.9 in · 430 mm | 18.1 in · 460 mm | +7% 903/903-4 |
| Turning radius, braked declared | 15.4 ft · 4.70 m | 12.5 ft · 3.82 m | +23% Favorit 610 LS |
| Fuel tank declared | 232.5 qt · 220 L | 95.1 qt · 90.0 L | +144% Favorit 610 LS |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Fendt Favorit 610 LS sources
- Source: Traktorenlexikon, “Fendt Favorit 610 LS”
- Source: Traktorenlexikon, “Fendt Favorit 600 LS”
VALMET 903/903-4 sources
- Source: Traktorenlexikon, “Valmet 903”
- Source: Traktorenlexikon, “Valmet 802”