• Rigid chassis
  • WhichTractor size: Standard-size
  • Not independently tested
  • 1968–1975

It was ranked on an engine power figure whose source does not say gross or net. WhichTractor size, not the maker’s category

Derived by WhichTractor from a sourced three-point linkage. How we decide what a machine is

Ford 5095 Full specifications

Ford 2704 E six-cylinder diesel. The manufacturer claimed 93.7 horsepower. No laboratory has tested one, so there is no measured figure at the shaft.

Engine power, claimed · gross or net not stated

93.7 hp

69.9 kW as stated by the source

Not independently tested

Claimed · standard not stated by the source

Source · Traktorenlexikon, “Ford 5095”, claimed

Weight
6,614 lb
3-point lift
6,834 lb
Hyd. flow
6.0 gpm
Top speed
15.5 mph

Ford 5095 specs: key facts

  • The Ford 5095 was built from 1968 to 1975.

  • The Ford 5095 was sold under the Ford badge and built by EVA.

  • The Ford 5095 has a claimed engine power (gross or net not stated) of 69.9 kW (93.7 hp); it has no measured PTO figure.

  • The Ford 5095 is two-wheel drive (2WD).

  • The Ford 5095 has a Ford 2704 E engine, a 6-cylinder 5.95 L diesel unit.

  • The Ford 5095 weighs 3,000 kg (6,614 lb) unladen.

  • The Ford 5095 has an independent rear PTO running at 540 rpm.

  • The three-point hitch of the Ford 5095 lifts 3,100 kg (6,834 lb) at the lower-link ends.

  • The hydraulic pump of the Ford 5095 delivers 22.7 L/min (6.0 gpm).

Source · Traktorenlexikon, “Ford 5095”

How much horsepower does a 5095 have?

The only figure for the 5095 is 93.7 hp (69.9 kW) of claimed engine power, gross or net not stated, no test standard stated — not power at the shaft.

Engine, claimed (gross/net not stated)
93.7 hp

Source · Traktorenlexikon, “Ford 5095”

What engine is in a 5095?

A 5095 has a Ford 2704 E, a 6-cylinder 5.95 L diesel engine.

Engine — 5095 engine specifications
Make & modelFord 2704 E
Cylinders6, liquid-cooled
Displacement363.0 ci · 5.95 L
Max torque239 lb·ft · 324 N·m @ 1,650 rpm

Source · Traktorenlexikon, “Ford 5095”

How much will a 5095 lift, and what is its hydraulic flow?

A 5095 lifts 6,834 lb (3,100 kg) at the lower-link ends of its Category 2 three-point hitch.

Hydraulics & PTO — 5095 hydraulics and PTO specifications
Pump flow6.0 gpm · 22.7 L/min
Hitch categoryCategory 2
Lift at ends6,834 lb · 3,100 kg
Rear PTOIndependent, engine-driven, 540 rpm @ 1,900 engine rpmEngages under load
PTO shaft1 3/8"- 6 splines

Source · Traktorenlexikon, “Ford 5095”

What transmission does a 5095 have?

Transmission specifications for the 5095 are below.

Transmission — 5095 transmission specifications
ClutchPedal-operated dry single-plate clutch
SteeringRecirculating ball steering with hydraulic power assist
Top speed15.5 mph · 25 km/h

Source · Traktorenlexikon, “Ford 5095”

How much does a 5095 weigh?

A 5095 weighs 6,614 lb (3,000 kg) unladen.

Weights & dimensions — 5095 weights and dimensions
Unladen weight6,614 lb · 3,000 kg
Wheelbase99.6 in · 2,530 mm
Length153.5 in · 3,900 mm
Width76.8 in · 1,950 mm
Height94.5 in · 2,400 mm
Front track52.0–80.8 in · 1,321–2,052 mm
Rear track63.9–88.0 in · 1,624–2,235 mm
Turning radius, braked14.6 ft · 4.45 m

Source · Traktorenlexikon, “Ford 5095”

Which tractors compare with a 5095?

Within 10% of its 93.7 hp of claimed engine power, the same type, and first built within 15 years of it.

Everything else people ask

Is a 5095 two-wheel drive or four-wheel drive?

The Ford 5095 is two-wheel drive (2WD).

What PTO does a 5095 have?

A 5095 has a independent 540 rpm rear PTO on a 1 3/8"- 6 splines shaft.

Where this page comes from

Compiled from Traktorenlexikon, “Ford 5095”.

Last verified

Not yet verified

Spotted an error?

Sources

Facts taken from these documents, units converted. Numbers beside a figure refer to this list. Licences and attribution

  1. Traktorenlexikon: Ford 5095CC BY-SA 4.0, WIKIBOOKS-TL-110084 · revision 914754. Wikibooks contributors (Traktorenlexikon). Original document