• Rigid chassis
  • WhichTractor size: Standard-size
  • No lab test on file
  • 1972–1975
  • 10,126 built

It was ranked on an engine power figure whose source does not say gross or net. WhichTractor size, not the maker’s category

Derived by WhichTractor from a sourced three-point linkage. How we decide what a machine is

ALLIS-CHALMERS 200 specs: hp, weight, years

ALLIS-CHALMERS D-2900 six-cylinder diesel. The manufacturer claimed 93.7 horsepower. No laboratory has tested one, so there is no measured figure at the shaft.

Engine power, claimed · gross or net not stated

93.7 hp

69.9 kW as stated by the source

No lab test on file

Claimed · standard not stated by the source

Source · Traktorenlexikon, “Allis-Chalmers 200”, claimed

This is the maker’s own figure, measured at the engine. Power at the PTO is lower — by how much, for this machine, nobody has measured.

Weight
8,845 lb
3-point lift
4,597 lb
Hyd. flow
17.2 gpm
Top speed
15.5 mph

ALLIS-CHALMERS 200 specs: key facts

  • The ALLIS-CHALMERS 200 was built from 1972 to 1975.

  • The ALLIS-CHALMERS 200 has a claimed engine power (gross or net not stated) of 69.9 kW (93.7 hp); it has no measured PTO figure.

  • The ALLIS-CHALMERS 200 is two-wheel drive (2WD).

  • The ALLIS-CHALMERS 200 has a ALLIS-CHALMERS D-2900 engine, a 6-cylinder 4.93 L diesel unit.Source 1

  • The ALLIS-CHALMERS 200 weighs 4,012 kg (8,845 lb) unladen.

  • The ALLIS-CHALMERS 200 has a rear PTO running at 540 rpm / 1000 rpm.

  • The three-point hitch of the ALLIS-CHALMERS 200 lifts 2,085 kg (4,597 lb) at the lower-link ends.

  • The hydraulic pump of the ALLIS-CHALMERS 200 delivers 65.1 L/min (17.2 gpm).

Source · Traktorenlexikon, “Allis-Chalmers 200”

How does the 200 compare with its class?

  • Limitation:

    A three-point lift at the lower links of 2,085 kg is low for its class — 47% below the median of 3,910 kg across the 241 machines within 10% of its power that hold this figure.

  • Limitation:

    Eight forward gears is low for its class — 47% below the median of 15 across the 320 machines within 10% of its power that hold this figure.

Derived by WhichTractor from 332 comparable records. How we work this out

Illustration of the 1972–1975 ALLIS-CHALMERS 200, a 94 hp farm tractor, colour not recorded — shown unpainted, a drawing generated from its specification record
Illustration — not a photograph · colour not recorded — shown unpainted

How much horsepower does a 200 have?

The only figure for the 200 is 93.7 hp (69.9 kW) of claimed engine power, gross or net not stated, no test standard stated — not power at the shaft.

Engine, claimed (gross/net not stated)
93.7 hp

Source · Traktorenlexikon, “Allis-Chalmers 200”

What engine is in a 200?

A 200 has an ALLIS-CHALMERS D-2900, a 6-cylinder 4.93 L diesel engine.

Engine — 200 engine specifications
Make & modelALLIS-CHALMERS D-2900
Cylinders6, liquid-cooledSource 2
Displacement300.8 ci · 4.93 L

Source · Traktorenlexikon, “Allis-Chalmers 190XT”

How much will a 200 lift, and what is its hydraulic flow?

A 200 lifts 4,597 lb (2,085 kg) at the lower-link ends of its Category 2 three-point hitch.

Hydraulics & PTO — 200 hydraulics and PTO specifications
SystemOpen centre
Pump flow17.2 gpm · 65.1 L/min
Hitch categoryCategory 2
Lift at ends4,597 lb · 2,085 kg
Rear PTOtransmission-driven, 540 rpm / 1000 rpm @ 1,937 engine rpm

Source · Traktorenlexikon, “Allis-Chalmers 200”

What transmission does a 200 have?

Transmission specifications for the 200 are below.

Transmission — 200 transmission specifications
SteeringHydrostatic steering
Top speed15.5 mph · 25 km/h

Source · Traktorenlexikon, “Allis-Chalmers 200”

How much does a 200 weigh?

A 200 weighs 8,845 lb (4,012 kg) unladen.

Weights & dimensions — 200 weights and dimensions
Unladen weight8,845 lb · 4,012 kg
Wheelbase105.7 in · 2,686 mm
Length157.5 in · 4,000 mm
Width87.6 in · 2,226 mm
Height86.7 in · 2,202 mm
Ground clearance21.4 in · 543 mm
Front track60.0–84.0 in · 1,524–2,134 mmWikibooks gives one track for both axles
Rear track60.0–84.0 in · 1,524–2,134 mmWikibooks gives one track for both axles
Turning radius, braked11.1 ft · 3.38 m

Source · Traktorenlexikon, “Allis-Chalmers 200”

What oil does a 200 take, and how much?

A 200 engine takes 13.9 qt (13.2 L). Single source, not independently verified — always confirm against the operator’s manual for your machine.

200 fluid capacities, grades and service intervals
SystemCapacity
Engine oil13.9 qt · 13.2 LSource: Traktorenlexikon, “Allis-Chalmers 200” · single source, not independently verified
Transmission36.0 qt · 34.1 LSource: Traktorenlexikon, “Allis-Chalmers 200” · single source, not independently verified
Hydraulic25.0 qt · 23.7 LSource: Traktorenlexikon, “Allis-Chalmers 200” · single source, not independently verified
Final drives8.0 qt · 7.6 LSource: Traktorenlexikon, “Allis-Chalmers 200” · single source, not independently verified
Cooling system19.0 qt · 18.0 LSource: Traktorenlexikon, “Allis-Chalmers 200” · single source, not independently verified

Always confirm against the operator’s manual for your machine before service.

Which tractors compare with a 200?

Within 10% of its 93.7 hp of claimed engine power, the same type, and first built within 15 years of it.

Common questions about the ALLIS-CHALMERS 200

Is a 200 two-wheel drive or four-wheel drive?

The ALLIS-CHALMERS 200 is two-wheel drive (2WD).

What PTO does a 200 have?

A 200 has a 540 rpm / 1000 rpm rear PTO.

Sources and how this page was built

Compiled from Traktorenlexikon, “Allis-Chalmers 190XT”; and Traktorenlexikon, “Allis-Chalmers 200”.

Sources checked

14 SEP 2026

Spotted an error?

Sources

Facts taken from these documents, units converted. Numbers beside a figure refer to this list. Licences and attribution

  1. Traktorenlexikon: Allis-Chalmers 190XT — CC BY-SA 4.0, WIKIBOOKS-TL-123085 · revision 1090166. Wikibooks contributors (Traktorenlexikon). Original document
  2. Traktorenlexikon: Allis-Chalmers 200 — CC BY-SA 4.0, WIKIBOOKS-TL-123086 · revision 1090167. Wikibooks contributors (Traktorenlexikon). Original document