10 material differences · fewer than 12
Tractor oneFord 50951968–1975No measured PTO figureTractor twoSOMECA 1000 (TD)1971–1977No measured PTO figure
Which should you choose?
Read our verdict on the 5095 and the 1000 (TD) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
10 material differences · 3 fields identical or within 5%, which is not counted as material
| Field | 5095 | 1000 (TD) | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 93.7 hp | 93.7 hp | — |
| Engine declared | Ford 2704 E | FIAT-IVECO 8065.02.007 | differs |
| Displacement declared | 5.95 L | 5.18 L | +15% 5095 |
| Maximum torque declared | 239 lb·ft · 324 N·m | 226 lb·ft · 306 N·m | +6% 5095 |
| Transmission | |||
| Top speed declared | 15.5 mph · 25 km/h | 15.5 mph · 25 km/h | — |
| Clutch declared | Pedal-operated dry single-plate clutch | Pedal operated two stage dry FERODO double clutch | differs |
| Hydraulics & hitch | |||
| Pump flow declared | 6.0 gpm · 22.7 L/min | 12.3 gpm · 46.5 L/min | +105% 1000 (TD) |
| Rear PTO speeds declared | 540 rpm | 540/1000 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 6,614 lb · 3,000 kg | 7,771 lb · 3,525 kg | +18% 1000 (TD) |
| Wheelbase declared | 99.6 in · 2,530 mm | 97.6 in · 2,480 mm | — |
| Length declared | 153.5 in · 3,900 mm | 164.2 in · 4,170 mm | +7% 1000 (TD) |
| Width declared | 76.8 in · 1,950 mm | 78.7–99.7 in · 1,998–2,532 mm | differs |
| Ground clearance declared | — | 22.5 in · 571 mm | — |
| Turning radius, braked declared | 14.6 ft · 4.45 m | 12.5 ft · 3.81 m | +17% 5095 |
| Fuel tank declared | — | 124.7 qt · 118.0 L | — |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Ford 5095 sources
- Source: Traktorenlexikon, “Ford 5095”
SOMECA 1000 (TD) sources
- Source: Traktorenlexikon, “Someca 1000”
- Source: Traktorenlexikon, “Fiat 1000/1000 DT”