- Rigid chassis
- WhichTractor size: Standard-size
- Not independently tested
- 1963–1967
- 8,052 built
It was ranked on an engine power figure whose source does not say gross or net. WhichTractor size, not the maker’s category
Derived by WhichTractor from a sourced three-point linkage. How we decide what a machine is
International Harvester 806 Full specifications
INTERNATIONAL HARVESTER C-301 six-cylinder. The manufacturer claimed 93.7 horsepower. No laboratory has tested one, so there is no measured figure at the shaft.
Engine power, claimed · gross or net not stated
93.7 hp
69.9 kW as stated by the source
Not independently tested
Claimed · standard not stated by the source
Source · Traktorenlexikon, “IHC 806”, claimed
- Weight
- 8,459 lb
- Top speed
- 18.6 mph
International Harvester 806 specs: key facts
The International Harvester 806 was built from 1963 to 1967.
The International Harvester 806 has a claimed engine power (gross or net not stated) of 69.9 kW (93.7 hp); it has no measured PTO figure.
The International Harvester 806 was offered in two-wheel-drive and four-wheel-drive versions.
The International Harvester 806 has a INTERNATIONAL HARVESTER C-301 engine, a 6-cylinder unit.
The International Harvester 806 weighs 3,837 kg (8,459 lb) unladen.
The International Harvester 806 has a rear PTO running at 540/1000 rpm.
Source · Traktorenlexikon, “IHC 806”
How much horsepower does an 806 have?
The only figure for the 806 is 93.7 hp (69.9 kW) of claimed engine power, gross or net not stated, no test standard stated — not power at the shaft.
Source · Traktorenlexikon, “IHC 806”
What engine is in an 806?
An 806 has an INTERNATIONAL HARVESTER C-301, a 6-cylinder engine.
| Make & model | INTERNATIONAL HARVESTER C-301 |
|---|---|
| Cylinders | 6, liquid-cooled |
| Electrical system | 12 V |
Source · Traktorenlexikon, “IHC 806”
How much will an 806 lift?
Hydraulic and PTO specifications for the 806 are below.
| Rear PTO | 540/1000 rpm |
|---|---|
| PTO shaft | 1 1/8"- 6 splines |
Source · Traktorenlexikon, “IHC 806”
What transmission does an 806 have?
Transmission specifications for the 806 are below.
| Clutch | Pedal-operated dry single-plate clutch |
|---|---|
| Steering | Hydraulic steering |
| Top speed | 18.6 mph · 30 km/h |
Source · Traktorenlexikon, “IHC 806”
How much does an 806 weigh?
An 806 weighs 8,459 lb (3,837 kg) unladen.
| Unladen weight | 8,459 lb · 3,837 kgF: 3,924 |
|---|---|
| Wheelbase | 91.0 in · 2,311 mmF: 2,570 |
| Length | 161.0 in · 4,089 mm |
| Width | 110.0 in · 2,794 mm |
| Height | 81.0 in · 2,057 mm |
| Ground clearance | 17.0 in · 432 mmF: 543 |
| Front track | 53.0 in · 1,346 mmF: 203-406 |
| Rear track | 60.0–84.0 in · 1,524–2,134 mmF: 1,422-2,388 |
Source · Traktorenlexikon, “IHC 806”
Which tractors compare with an 806?
Within 10% of its 93.7 hp of claimed engine power, the same type, and first built within 15 years of it.
- Ford 509593.7 hp engine, claimed · 1968–1975Side by side with the 806 →
- Massey Ferguson MF 110293.7 hp engine, claimed · 1970–1976Side by side with the 806 →
- SOMECA 1000 (TD)93.7 hp engine, claimed · 1971–1977Side by side with the 806 →
- Renault 95193.7 hp engine, claimed · 1973–1977Side by side with the 806 →
- Renault 951-493.7 hp engine, claimed · 1974–1977Side by side with the 806 →
- Ford 950094 hp engine, claimed · 1968–1975Side by side with the 806 →
Everything else people ask
Is an 806 two-wheel drive or four-wheel drive?
The International Harvester 806 was offered in two-wheel-drive and four-wheel-drive versions.
What PTO does an 806 have?
An 806 has a 540/1000 rpm rear PTO on a 1 1/8"- 6 splines shaft.
Where this page comes from
Compiled from Traktorenlexikon, “IHC 806”.
Sources
Facts taken from these documents, units converted. Numbers beside a figure refer to this list. Licences and attribution
- Traktorenlexikon: IHC 806 — CC BY-SA 4.0, WIKIBOOKS-TL-118729 · revision 1032560. Wikibooks contributors (Traktorenlexikon). Original document