10 material differences · fewer than 12
Tractor oneFord 50951968–1975No measured PTO figureTractor twoRenault 9511973–1977No measured PTO figure
Which should you choose?
Read our verdict on the 5095 and the 951 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
10 material differences · 4 fields identical or within 5%, which is not counted as material
| Field | 5095 | 951 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 93.7 hp | 93.7 hp | — |
| Engine declared | Ford 2704 E | MWM D 227-6 | differs |
| Displacement declared | 5.95 L | 5.66 L | — |
| Maximum torque declared | 239 lb·ft · 324 N·m | 246 lb·ft · 334 N·m | — |
| Transmission | |||
| Top speed declared | 15.5 mph · 25 km/h | 15.5 mph · 25 km/h | — |
| Clutch declared | Pedal-operated dry single-plate clutch | Dry LuK double clutch | differs |
| Hydraulics & hitch | |||
| Pump flow declared | 6.0 gpm · 22.7 L/min | 8.7 gpm · 32.8 L/min | +44% 951 |
| Pressure declared | — | 2,321 psi · 160 bar | — |
| Three-point lift, at the coupling points declared | 6,834 lb · 3,100 kg | 9,039 lb · 4,100 kg | +32% 951 |
| Rear PTO speeds declared | 540 rpm | 540/1000 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 6,614 lb · 3,000 kg | 9,017 lb · 4,090 kg | +36% 951 |
| Wheelbase declared | 99.6 in · 2,530 mm | 105.0 in · 2,668 mm | +5% 951 |
| Length declared | 153.5 in · 3,900 mm | 172.5 in · 4,382 mm | +12% 951 |
| Width declared | 76.8 in · 1,950 mm | 77.0–96.7 in · 1,955–2,455 mm | differs |
| Ground clearance declared | — | 16.9 in · 430 mm | — |
| Turning radius, braked declared | 14.6 ft · 4.45 m | 11.5 ft · 3.51 m | +27% 5095 |
| Fuel tank declared | — | 123.6 qt · 117.0 L | — |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Ford 5095 sources
Source
- Source: Traktorenlexikon, “Ford 5095”
Renault 951 sources
Source
- Source: Traktorenlexikon, “Renault 951 R7641”
- Source: Traktorenlexikon, “Renault 891 R7681”