- Rigid chassis
- WhichTractor size: Standard-size
- No lab test on file
- 1970–1976
It was ranked on an engine power figure whose source does not say gross or net. WhichTractor size, not the maker’s category
Derived by WhichTractor from a sourced three-point linkage. How we decide what a machine is
Massey Ferguson 1102 specs: hp, weight, years
Eicher EDK 6 or EDK 6-3 six-cylinder diesel. The manufacturer claimed 93.7 horsepower. No laboratory has tested one, so there is no measured figure at the shaft.
Engine power, claimed · gross or net not stated
93.7 hp
69.9 kW as stated by the source
No lab test on file
Claimed · standard not stated by the source
Source · Traktorenlexikon, “Massey Ferguson MF 1102”, claimed
This is the maker’s own figure, measured at the engine. Power at the PTO is lower — by how much, for this machine, nobody has measured.
- Weight
- 9,259 lb
- Hyd. flow
- 10.6 gpm
- Top speed
- 18.6 mph
Massey Ferguson 1102 specs: key facts
The Massey Ferguson 1102 was built from 1970 to 1976.
The Massey Ferguson 1102 has a claimed engine power (gross or net not stated) of 69.9 kW (93.7 hp); it has no measured PTO figure.
The Massey Ferguson 1102 is four-wheel drive (4WD).
The Massey Ferguson 1102 has a Eicher EDK 6 or EDK 6-3 engine, a 6-cylinder 5.90 L diesel unit.
The Massey Ferguson 1102 weighs 4,200 kg (9,259 lb) unladen.
The Massey Ferguson 1102 has a rear PTO running at 540/1000 rpm.
The hydraulic pump of the Massey Ferguson 1102 delivers 40.0 L/min (10.6 gpm).
Source · Traktorenlexikon, “Massey Ferguson MF 1102”
How much horsepower does an 1102 have?
The only figure for the 1102 is 93.7 hp (69.9 kW) of claimed engine power, gross or net not stated, no test standard stated — not power at the shaft.
Source · Traktorenlexikon, “Massey Ferguson MF 1102”
What engine is in an 1102?
An 1102 has an Eicher EDK 6 or EDK 6-3, a 6-cylinder 5.90 L diesel engine.
| Make & model | Eicher EDK 6 or EDK 6-3 |
|---|---|
| Cylinders | 6, air-cooled |
| Displacement | 359.8 ci · 5.90 L |
| Electrical system | 12 V |
Source · Traktorenlexikon, “Massey Ferguson MF 1102”
How much will an 1102 lift, and what is its hydraulic flow?
Hydraulic and PTO specifications for the 1102 are below.
| Pump flow | 10.6 gpm · 40.0 L/min |
|---|---|
| Hitch category | Category 2 |
| Rear PTO | 540/1000 rpm |
Source · Traktorenlexikon, “Massey Ferguson MF 1102”
What transmission does an 1102 have?
Transmission specifications for the 1102 are below.
| Clutch | Dry Fichtel & Sachs double clutch |
|---|---|
| Steering | Hydrostatic ZF steering |
| Top speed | 18.6 mph · 30 km/h |
Source · Traktorenlexikon, “Massey Ferguson MF 1102”
How much does an 1102 weigh?
An 1102 weighs 9,259 lb (4,200 kg) unladen.
| Unladen weight | 9,259 lb · 4,200 kg |
|---|---|
| Maximum permissible mass | 14,330 lb · 6,500 kg |
| Maximum front axle load | 5,071 lb · 2,300 kg |
| Maximum rear axle load | 9,259 lb · 4,200 kg |
| Wheelbase | 106.2 in · 2,698 mm |
| Length | 160.6 in · 4,080 mm |
| Width | 82.3 in · 2,090 mm |
| Height | 67.9 in · 1,725 mm |
| Ground clearance | 17.7 in · 450 mm |
| Front track | 61.8 in · 1,570 mm |
| Rear track | 64.6 in · 1,640 mm |
| Turning radius, braked | 19.0 ft · 5.80 m |
Source · Traktorenlexikon, “Massey Ferguson MF 1102”
What oil does an 1102 take, and how much?
An 1102 engine takes 20.1 qt (19.0 L). Single source, not independently verified — always confirm against the operator’s manual for your machine.
| System | Capacity |
|---|---|
| Engine oil | 20.1 qt · 19.0 LSource: Traktorenlexikon, “Massey Ferguson MF 1102” · single source, not independently verified |
| Transmission | 42.3 qt · 40.0 LSource: Traktorenlexikon, “Massey Ferguson MF 1102” · single source, not independently verified |
Always confirm against the operator’s manual for your machine before service.
Which tractors compare with an 1102?
Within 10% of its 93.7 hp of claimed engine power, the same type, and first built within 15 years of it.
- SOMECA 1000 (TD)93.7 hp engine, claimed · 1971–1977Side by side with the 1102 →
- ALLIS-CHALMERS 20093.7 hp engine, claimed · 1972–1975Side by side with the 1102 →
- Ford 509593.7 hp engine, claimed · 1968–1975Side by side with the 1102 →
- Ford 6.500 (A)93.7 hp engine, claimed · 1968–1974Side by side with the 1102 →
- Renault 95193.7 hp engine, claimed · 1973–1977Side by side with the 1102 →
- Renault 951-493.7 hp engine, claimed · 1974–1977Side by side with the 1102 →
Common questions about the Massey Ferguson 1102
Is an 1102 two-wheel drive or four-wheel drive?
The Massey Ferguson 1102 is four-wheel drive (4WD).
What PTO does an 1102 have?
An 1102 has a 540/1000 rpm rear PTO.
Sources and how this page was built
Compiled from Traktorenlexikon, “Massey Ferguson MF 1102”.
Sources
Facts taken from these documents, units converted. Numbers beside a figure refer to this list. Licences and attribution
- Traktorenlexikon: Massey Ferguson MF 1102 — CC BY-SA 4.0, WIKIBOOKS-TL-104278 · revision 954677. Wikibooks contributors (Traktorenlexikon). Original document