8 material differences · fewer than 12

Tractor oneFord 4630 (A)1990–1999No measured PTO figureTractor twoVALMET 355 (355/4)1990–1994No measured PTO figure

Which should you choose?

Read our verdict on the 4630 (A) and the 355 (355/4) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

8 material differences · 8 fields identical or within 5%, which is not counted as material

Ford 4630 (A) and VALMET 355 (355/4), field by field
Field	4630 (A)	355 (355/4)	Gap
Engine
Engine power, claimed claimed	60.2 hp	60.2 hp	—
Engine declared	Ford D 201 CID-NA	VALMET TD-33 D 3 or 320 D	differs
Displacement declared	3.29 L	3.30 L	—
Maximum torque declared	162 lb·ft · 220 N·m	146 lb·ft · 198 N·m	+11% 4630 (A)
Transmission
Top speed declared	18.6–24.9 mph · 30–40 km/h	15.5 mph · 25 km/h	differs
Clutch declared	Pedal-operated dry AP single-disc clutch	—	—
Hydraulics & hitch
Hydraulic centre declared	Open centre	Open centre	—
Pump flow declared	7.8 gpm · 29.5 L/min	8.2 gpm · 31.0 L/min	—
Pressure declared	2,857 psi · 197 bar	4,206 psi · 290 bar	+47% 355 (355/4)
Rear PTO speeds declared	540 rpm	540 rpm	—
Weight & dimensions
Unladen weight declared	6,151 lb · 2,790 kg	5,886 lb · 2,670 kg	—
Wheelbase declared	84.5 in · 2,146 mm	83.1 in · 2,112 mm	—
Length declared	138.6 in · 3,521 mm	146.1 in · 3,710 mm	+5% 355 (355/4)
Width declared	68.3–96.7 in · 1,735–2,457 mm	77.4–97.8 in · 1,965–2,485 mm	differs
Height, over the cab declared	97.8 in · 2,485 mm	96.9 in · 2,460 mm	—
Ground clearance declared	14.8 in · 375 mm	15.9 in · 405 mm	+8% 355 (355/4)
Turning radius, braked declared	—	10.2 ft · 3.10 m	—
Fuel tank declared	69.4 qt · 65.7 L	77.1 qt · 73.0 L	+11% 355 (355/4)

Source

Source