9 material differences · fewer than 12
Tractor oneFord 4630 (A)1990–1999No measured PTO figureTractor twoVALMET 365 (365-4)1994–1997No measured PTO figure
Which should you choose?
Read our verdict on the 4630 (A) and the 365 (365-4) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
9 material differences · 8 fields identical or within 5%, which is not counted as material
| Field | 4630 (A) | 365 (365-4) | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 60.2 hp | 60.2 hp | — |
| Engine declared | Ford D 201 CID-NA | VALMET 320 D | differs |
| Displacement declared | 3.29 L | 3.30 L | — |
| Maximum torque declared | 162 lb·ft · 220 N·m | 162 lb·ft · 220 N·m | — |
| Transmission | |||
| Top speed declared | 18.6–24.9 mph · 30–40 km/h | 18.6–24.9 mph · 30–40 km/h | — |
| Clutch declared | Pedal-operated dry AP single-disc clutch | Dry FICHTEL & SACHS double clutch | differs |
| Hydraulics & hitch | |||
| Hydraulic centre declared | Open centre | Open centre | — |
| Pump flow declared | 7.8 gpm · 29.5 L/min | 14.5 gpm · 55.0 L/min | +86% 365 (365-4) |
| Pressure declared | 2,857 psi · 197 bar | 2,901 psi · 200 bar | — |
| Three-point lift, at the coupling points declared | 4,381 lb · 1,987 kg | 5,688 lb · 2,580 kg | +30% 365 (365-4) |
| Rear PTO speeds declared | 540 rpm | 540E/540 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 6,151 lb · 2,790 kg | 6,217 lb · 2,820 kg | — |
| Wheelbase declared | 84.5 in · 2,146 mm | 83.1 in · 2,112 mm | — |
| Length declared | 138.6 in · 3,521 mm | 146.1 in · 3,710 mm | +5% 365 (365-4) |
| Width declared | 68.3–96.7 in · 1,735–2,457 mm | 79.9 in · 2,030 mm | differs |
| Ground clearance declared | 14.8 in · 375 mm | 15.9 in · 405 mm | +8% 365 (365-4) |
| Turning radius, braked declared | — | 11.5 ft · 3.50 m | — |
| Fuel tank declared | 69.4 qt · 65.7 L | 77.1 qt · 73.0 L | +11% 365 (365-4) |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Ford 4630 (A) sources
- Source: Traktorenlexikon, “Ford 4630”
VALMET 365 (365-4) sources
- Source: Traktorenlexikon, “Valmet 365”
- Source: Traktorenlexikon, “Valmet 255”