- WhichTractor size: Standard-size
- No lab test on file
- 1958–1961
- 1,743 built
WhichTractor size, not the maker’s category
Derived by WhichTractor from a sourced three-point linkage. How we decide what a machine is
Fahr D 177 specs: hp, weight, years
Daimler-Benz OM 636 VI-E four-cylinder diesel. The manufacturer claimed 34 horsepower. No laboratory has tested one, so there is no measured figure at the shaft.
Engine power, claimed · gross or net not stated
34 hp
25 kW as stated by the source
No lab test on file
Claimed · standard not stated by the source
Source · Traktorenlexikon, “Fahr D 177”, claimed
This is the maker’s own figure, measured at the engine. Power at the PTO is lower — by how much, for this machine, nobody has measured.
- Weight
- 3,638 lb
- 3-point lift
- 2,866 lb
- Top speed
- 12.2 mph
Fahr D 177 specs: key facts
The Fahr D 177 was built from 1958 to 1961.
The Fahr D 177 has a claimed engine power (gross or net not stated) of 25 kW (34 hp); it has no measured PTO figure.
The Fahr D 177 is two-wheel drive (2WD).Source 2
The Fahr D 177 has a Daimler-Benz OM 636 VI-E engine, a 4-cylinder 1.77 L diesel unit.
The Fahr D 177 weighs 1,650 kg (3,638 lb) unladen.
The three-point hitch of the Fahr D 177 lifts 1,300 kg (2,866 lb) at the lower-link ends.
Source · Traktorenlexikon, “Fahr D 177”
How does the D 177 compare with its class?
- Limitation:
A maximum engine torque of 93.2 N·m is low for its class — 30% below the median of 133 N·m across the 86 machines within 10% of its power that hold this figure.
Derived by WhichTractor from 150 comparable records. How we work this out
How much horsepower does a D 177 have?
The only figure for the D 177 is 34 hp (25 kW) of claimed engine power, gross or net not stated, no test standard stated — not power at the shaft.
Source · Traktorenlexikon, “Fahr D 177”
What engine is in a D 177?
A D 177 has a Daimler-Benz OM 636 VI-E, a 4-cylinder 1.77 L diesel engine.
| Make & model | Daimler-Benz OM 636 VI-E |
|---|---|
| Cylinders | 4, liquid-cooled |
| Displacement | 107.8 ci · 1.77 L |
| Max torque | 69 lb·ft · 93 N·m @ 2,000 rpmSource 2 |
| Electrical system | 12 V |
Source · Traktorenlexikon, “Fahr D 177”
How much will a D 177 lift?
A D 177 lifts 2,866 lb (1,300 kg) at the lower-link ends.
| Pressure | 3,556 psi · 245 barSource 2 |
|---|---|
| Lift at ends | 2,866 lb · 1,300 kg |
| Rear PTO | Independent, engine-drivenGround-speed PTO available |
| PTO shaft | 29 x 34,9 x 8,7 mm |
Source · Traktorenlexikon, “Fahr D 177”
What transmission does a D 177 have?
Transmission specifications for the D 177 are below.
| Clutch | Pedal operated dry Fichtel & Sachs double clutch |
|---|---|
| Brakes | Pedal operated internal expanding brake acting on side shafts |
| Steering | ZF single wheel steering |
| Top speed | 12.2 mph · 19.6 km/h |
Source · Traktorenlexikon, “Fahr D 177”
How much does a D 177 weigh?
A D 177 weighs 3,638 lb (1,650 kg) unladen.
| Unladen weight | 3,638 lb · 1,650 kg |
|---|---|
| Maximum permissible mass | 5,732 lb · 2,600 kg |
| Maximum front axle load | 1,984 lb · 900 kg |
| Maximum rear axle load | 3,748 lb · 1,700 kg |
| Wheelbase | 76.8 in · 1,950 mm |
| Length | 126.0 in · 3,200 mm |
| Width | 61.1 in · 1,552 mm |
| Height | 56.3 in · 1,430 mm |
| Ground clearance | 15.7 in · 400 mm |
| Front track | 49.2–59.1 in · 1,250–1,500 mmWikibooks gives one track for both axles; the article lists alternatives |
| Rear track | 49.2–59.1 in · 1,250–1,500 mmWikibooks gives one track for both axles; the article lists alternatives |
| Turning radius, braked | 9.3 ft · 2.83 m |
Source · Traktorenlexikon, “Fahr D 177”
What oil does a D 177 take, and how much?
A D 177 engine takes 6.3 qt (6 L). Single source, not independently verified — always confirm against the operator’s manual for your machine.
| System | Capacity |
|---|---|
| Engine oil | 6.3 qt · 6 LSource: Traktorenlexikon, “Fahr D 177” · single source, not independently verified |
| Transmission | 0.5 qt · 1 LSource: Traktorenlexikon, “Fahr D 177” · single source, not independently verified |
| Hydraulic | 10.6 qt · 10 LSource: Traktorenlexikon, “Fahr D 177” · single source, not independently verified |
| Cooling system | 9.0 qt · 8.5 LSource: Traktorenlexikon, “Fahr D 177 S” · single source, not independently verified |
Always confirm against the operator’s manual for your machine before service.
Which tractors compare with a D 177?
Within 10% of its 32 hp at the PTO as the maker claimed it, with no laboratory test on file, the same type, and first built within 15 years of it.
- International Harvester 27631.5 hp PTO, claimed · 1968–1974Side by side with the D 177 →
- International Harvester 35431.5 hp PTO, claimed · 1970–1974Side by side with the D 177 →
- Renault R-5731.2 hp PTO, claimed · 1967–1972Side by side with the D 177 →
- Nuffield 10/4231.2 hp PTO, claimed · 1964–1967Side by side with the D 177 →
- International Harvester B-27532.3 hp PTO, claimed · 1958–1961Side by side with the D 177 →
- International Harvester Farmall 24032.3 hp PTO, claimed · 1958–1961Side by side with the D 177 →
Common questions about the Fahr D 177
Is a D 177 two-wheel drive or four-wheel drive?
The Fahr D 177 is two-wheel drive (2WD).
Sources and how this page was built
Compiled from Traktorenlexikon, “Fahr D 177”; and Traktorenlexikon, “Fahr D 177 S”.
Sources
Facts taken from these documents, units converted. Numbers beside a figure refer to this list. Licences and attribution
- Traktorenlexikon: Fahr D 177 — CC BY-SA 4.0, WIKIBOOKS-TL-43361 · revision 837010. Wikibooks contributors (Traktorenlexikon). Original document
- Traktorenlexikon: Fahr D 177 S — CC BY-SA 4.0, WIKIBOOKS-TL-43362 · revision 1015089. Wikibooks contributors (Traktorenlexikon). Original document