- WhichTractor size: Utility
- No lab test on file
- 1970–1974
WhichTractor size, not the maker’s category
Derived by WhichTractor from a sourced three-point linkage. How we decide what a machine is
International Harvester 354 specs: hp, weight, years
INTERNATIONAL HARVESTER BD-144 A four-cylinder diesel. The manufacturer claimed 34.5 horsepower. No laboratory has tested one, so there is no measured figure at the shaft.
Engine power, claimed · gross or net not stated
34.5 hp
25.7 kW as stated by the source
No lab test on file
Claimed · standard not stated by the source
Source · Traktorenlexikon, “IHC 354”, claimed
This is the maker’s own figure, measured at the engine. Power at the PTO is lower — by how much, for this machine, nobody has measured.
- Weight
- 3,741–4,034 lb
- Hyd. flow
- 6.6 gpm
- Top speed
- 15.5 mph
International Harvester 354 specs: key facts
The International Harvester 354 was built from 1970 to 1974.
The International Harvester 354 has a claimed engine power (gross or net not stated) of 25.7 kW (34.5 hp); it has no measured PTO figure.
The International Harvester 354 is two-wheel drive (2WD).Source 2
The International Harvester 354 has a INTERNATIONAL HARVESTER BD-144 A engine, a 4-cylinder 2.35 L diesel unit.Source 3
The International Harvester 354 weighs 1,697–1,830 kg (3,741–4,034 lb) unladen.
The International Harvester 354 has an independent rear PTO running at 540 rpm.
The hydraulic pump of the International Harvester 354 delivers 25.0 L/min (6.6 gpm).
Source · Traktorenlexikon, “IHC 354”
How much horsepower does a 354 have?
The only figure for the 354 is 34.5 hp (25.7 kW) of claimed engine power, gross or net not stated, no test standard stated — not power at the shaft.
Source · Traktorenlexikon, “IHC 354”
What engine is in a 354?
A 354 has an INTERNATIONAL HARVESTER BD-144 A, a 4-cylinder 2.35 L diesel engine.
| Make & model | INTERNATIONAL HARVESTER BD-144 ASource 3 |
|---|---|
| Cylinders | 4, liquid-cooledSource 3 |
| Displacement | 143.2 ci · 2.35 LSource 3 |
| Max torque | 97 lb·ft · 132 N·m @ 1,260 rpm |
| Electrical system | 12 V |
Source · Traktorenlexikon, “IHC 354”
How much will a 354 lift, and what is its hydraulic flow?
Hydraulic and PTO specifications for the 354 are below.
| Pump flow | 6.6 gpm · 25.0 L/min |
|---|---|
| Rear PTO | Independent, 540 rpm @ 1,824 engine rpm |
| PTO shaft | 1 3/8"- 6 splines |
Source · Traktorenlexikon, “IHC 354”
What transmission does a 354 have?
Transmission specifications for the 354 are below.
| Clutch | Pedal-operated dry Borg & Beck single-plate clutch |
|---|---|
| Brakes | Pedal-operated GIRLING disc brake mounted on differential half-shafts as individual wheel brakeSource 2On record for 1 of 2 configurations |
| Steering | Mechanical worm steering |
| Top speed | 15.5 mph · 25 km/h |
Source · Traktorenlexikon, “IHC 354”
How much does a 354 weigh?
A 354 weighs 3,741–4,034 lb (1,697–1,830 kg) unladen.
| Unladen weight | 3,741–4,034 lb · 1,697–1,830 kgthe article lists alternatives |
|---|---|
| Wheelbase | 76.5 in · 1,943 mm |
| Length | 126.0 in · 3,200 mm |
| Width | 64.0 in · 1,626 mm |
| Height | 57.0 in · 1,448 mm |
| Ground clearance | 18.0 in · 457 mm |
| Front track | 48.0–76.0 in · 1,219–1,930 mmWikibooks gives one track for both axles |
| Rear track | 48.0–76.0 in · 1,219–1,930 mmWikibooks gives one track for both axles |
| Turning radius, braked | 10.2 ft · 3.12 m |
Source · Traktorenlexikon, “IHC 354”
What oil does a 354 take, and how much?
A 354 engine takes 7.8 qt (7.4 L). Single source, not independently verified — always confirm against the operator’s manual for your machine.
| System | Capacity |
|---|---|
| Engine oil | 7.8 qt · 7.4 LSource: Traktorenlexikon, “IHC 354” · single source, not independently verified |
| Transmission | 25.3 qt · 23.9 LSource: Traktorenlexikon, “IHC 354” · single source, not independently verified |
| Hydraulic | 12.0 qt · 11.4 LSource: Traktorenlexikon, “IHC 354” · single source, not independently verified |
Always confirm against the operator’s manual for your machine before service.
Which tractors compare with a 354?
Within 10% of its 31.5 hp at the PTO as the maker claimed it, with no laboratory test on file, the same type, and first built within 15 years of it.
- International Harvester 27631.5 hp PTO, claimed · 1968–1974Side by side with the 354 →
- Fahr D 17732 hp PTO, claimed · 1958–1961Side by side with the 354 →
- Renault R-5731.2 hp PTO, claimed · 1967–1972Side by side with the 354 →
- Nuffield 10/4231.2 hp PTO, claimed · 1964–1967Side by side with the 354 →
- David Brown 770 Selematic32.3 hp PTO, claimed · 1965–1970Side by side with the 354 →
- International Harvester B-27532.3 hp PTO, claimed · 1958–1961Side by side with the 354 →
Common questions about the International Harvester 354
Is a 354 two-wheel drive or four-wheel drive?
The International Harvester 354 is two-wheel drive (2WD).
What PTO does a 354 have?
A 354 has a independent 540 rpm rear PTO on a 1 3/8"- 6 splines shaft.
Sources and how this page was built
Compiled from Traktorenlexikon, “McCormick 276”; Traktorenlexikon, “IHC 354”; and Traktorenlexikon, “IHC 354 (USA)”.
Sources
Facts taken from these documents, units converted. Numbers beside a figure refer to this list. Licences and attribution
- Traktorenlexikon: IHC 354 — CC BY-SA 4.0, WIKIBOOKS-TL-118512 · revision 1029815. Wikibooks contributors (Traktorenlexikon). Original document
- Traktorenlexikon: IHC 354 (USA) — CC BY-SA 4.0, WIKIBOOKS-TL-118803 · revision 1034254. Wikibooks contributors (Traktorenlexikon). Original document
- Traktorenlexikon: McCormick 276 — CC BY-SA 4.0, WIKIBOOKS-TL-117967 · revision 1059853. Wikibooks contributors (Traktorenlexikon). Original document