- WhichTractor size: Utility
- No lab test on file
- 1968–1974
WhichTractor size, not the maker’s category
Derived by WhichTractor from a sourced three-point linkage. How we decide what a machine is
International Harvester 276 specs: hp, weight, years
INTERNATIONAL HARVESTER BD-144 A four-cylinder diesel. The manufacturer claimed 35.5 horsepower. No laboratory has tested one, so there is no measured figure at the shaft.
Engine power, claimed · gross or net not stated
35.5 hp
26.5 kW as stated by the source
No lab test on file
Claimed · standard not stated by the source
Source · Traktorenlexikon, “McCormick 276”, claimed
This is the maker’s own figure, measured at the engine. Power at the PTO is lower — by how much, for this machine, nobody has measured.
- Weight
- 3,741 lb
- Hyd. flow
- 6.6 gpm
- Top speed
- 15.5 mph
International Harvester 276 specs: key facts
The International Harvester 276 was built from 1968 to 1974.
The International Harvester 276 has a claimed engine power (gross or net not stated) of 26.5 kW (35.5 hp); it has no measured PTO figure.Source 2
The International Harvester 276 is two-wheel drive (2WD).Source 2
The International Harvester 276 has a INTERNATIONAL HARVESTER BD-144 A engine, a 4-cylinder 2.35 L diesel unit.Source 2
The International Harvester 276 weighs 1,697 kg (3,741 lb) unladen.Source 2
The International Harvester 276 has an independent rear PTO running at 540 rpm.
The hydraulic pump of the International Harvester 276 delivers 25.0 L/min (6.6 gpm).
Source · Traktorenlexikon, “IHC 276”
How much horsepower does a 276 have?
The only figure for the 276 is 35.5 hp (26.5 kW) of claimed engine power, gross or net not stated, no test standard stated — not power at the shaft.
Source · Traktorenlexikon, “McCormick 276”
What engine is in a 276?
A 276 has an INTERNATIONAL HARVESTER BD-144 A, a 4-cylinder 2.35 L diesel engine.
| Make & model | INTERNATIONAL HARVESTER BD-144 A |
|---|---|
| Cylinders | 4, liquid-cooledSource 1 |
| Displacement | 143.2 ci · 2.35 L |
| Max torque | 97 lb·ft · 132 N·m @ 1,260 rpm |
| Electrical system | 12 VSource 1 |
Source · Traktorenlexikon, “McCormick 276”
How much will a 276 lift, and what is its hydraulic flow?
Hydraulic and PTO specifications for the 276 are below.
| Pump flow | 6.6 gpm · 25.0 L/min |
|---|---|
| Rear PTO | Independent, 540 rpm @ 1,824 engine rpmSource 2 |
| PTO shaft | 1 1/8"- 6 splinesSource 2 |
Source · Traktorenlexikon, “IHC 276”
What transmission does a 276 have?
Transmission specifications for the 276 are below.
| Clutch | Pedal-operated two-stage dry BORG & BECK double clutchSource 1Sources disagreePedal-operated, two-stage and dry Borg & Beck double clutch (Traktorenlexikon, “McCormick 276”) |
|---|---|
| Steering | Mechanical worm steering |
| Top speed | 15.5 mph · 25 km/h |
Source · Traktorenlexikon, “McCormick 276”
How much does a 276 weigh?
A 276 weighs 3,741 lb (1,697 kg) unladen.
| Unladen weight | 3,741 lb · 1,697 kg |
|---|---|
| Wheelbase | 76.5 in · 1,943 mm |
| Length | 121.3 in · 3,080 mmSource 1 |
| Width | 74.0 in · 1,880 mmSource 1 |
| Height | 59.3 in · 1,505 mm |
| Ground clearance | 13.7 in · 349 mm |
| Front track | 48.0–76.0 in · 1,219–1,930 mm |
| Rear track | 56.0–76.0 in · 1,422–1,930 mm |
| Turning radius, braked | 10.4 ft · 3.16 mSource 1 |
Source · Traktorenlexikon, “McCormick 276”
What oil does a 276 take, and how much?
A 276 engine takes 7.8 qt (7.4 L). Single source, not independently verified — always confirm against the operator’s manual for your machine.
| System | Capacity |
|---|---|
| Engine oil | 7.8 qt · 7.4 LSource: Traktorenlexikon, “McCormick 276” · single source, not independently verified |
| Transmission | 25.3 qt · 23.9 LSource: Traktorenlexikon, “McCormick 276” · single source, not independently verified |
| Hydraulic | 12.0 qt · 11.4 LSource: Traktorenlexikon, “IHC 276” · single source, not independently verified |
Always confirm against the operator’s manual for your machine before service.
Which tractors compare with a 276?
Within 10% of its 31.5 hp at the PTO as the maker claimed it, with no laboratory test on file, the same type, and first built within 15 years of it.
- International Harvester 35431.5 hp PTO, claimed · 1970–1974Side by side with the 276 →
- Fahr D 17732 hp PTO, claimed · 1958–1961Side by side with the 276 →
- Renault R-5731.2 hp PTO, claimed · 1967–1972Side by side with the 276 →
- Nuffield 10/4231.2 hp PTO, claimed · 1964–1967Side by side with the 276 →
- David Brown 770 Selematic32.3 hp PTO, claimed · 1965–1970Side by side with the 276 →
- International Harvester B-27532.3 hp PTO, claimed · 1958–1961Side by side with the 276 →
Common questions about the International Harvester 276
Is a 276 two-wheel drive or four-wheel drive?
The International Harvester 276 is two-wheel drive (2WD).
What PTO does a 276 have?
A 276 has a independent 540 rpm rear PTO on a 1 1/8"- 6 splines shaft.
Sources and how this page was built
Compiled from Traktorenlexikon, “McCormick 276”; and Traktorenlexikon, “IHC 276”.
Sources
Facts taken from these documents, units converted. Numbers beside a figure refer to this list. Licences and attribution
- Traktorenlexikon: IHC 276 — CC BY-SA 4.0, WIKIBOOKS-TL-118447 · revision 1031596. Wikibooks contributors (Traktorenlexikon). Original document
- Traktorenlexikon: McCormick 276 — CC BY-SA 4.0, WIKIBOOKS-TL-117967 · revision 1059853. Wikibooks contributors (Traktorenlexikon). Original document