• Rigid chassis
  • WhichTractor size: Standard-size
  • Not independently tested
  • 1988–1991

It was ranked on an engine power figure whose source does not say gross or net. WhichTractor size, not the maker’s category

Derived by WhichTractor from a sourced three-point linkage. How we decide what a machine is

Ford 7810 Full specifications

The manufacturer claimed 96.7 horsepower. No laboratory has tested one, so there is no measured figure at the shaft.

Engine power, claimed · gross or net not stated

96.7 hp

72.1 kW as stated by the source

Not independently tested

Claimed · standard not stated by the source

Source · Traktorenlexikon, “Ford 7810”, claimed

Weight
7,749 lb
3-point lift
9,381 lb
Hyd. flow
18.2 gpm
Top speed
18.6 mph

Ford 7810 specs: key facts

  • The Ford 7810 was built from 1988 to 1991.

  • The Ford 7810 has a claimed engine power (gross or net not stated) of 72.1 kW (96.7 hp); it has no measured PTO figure.

  • The Ford 7810 was built in two-wheel drive (2WD) and four-wheel drive (4WD) versions, depending on configuration.

  • The Ford 7810 weighs 3,515 kg (7,749 lb) unladen.

  • The Ford 7810 has an independent rear PTO running at 540/1000 rpm.

  • The three-point hitch of the Ford 7810 lifts 4,255 kg (9,381 lb) at the lower-link ends.

  • The hydraulic pump of the Ford 7810 delivers 68.9 L/min (18.2 gpm).

Source · Traktorenlexikon, “Ford 7810”

How much horsepower does a 7810 have?

The only figure for the 7810 is 96.7 hp (72.1 kW) of claimed engine power, gross or net not stated, no test standard stated — not power at the shaft.

Engine, claimed (gross/net not stated)
96.7 hp

Source · Traktorenlexikon, “Ford 7810”

How much will a 7810 lift, and what is its hydraulic flow?

A 7810 lifts 9,381 lb (4,255 kg) at the lower-link ends of its Category 2 three-point hitch.

Hydraulics & PTO — 7810 hydraulics and PTO specifications
Pump flow18.2 gpm · 68.9 L/min
Hitch categoryCategory 2
Lift at ends9,381 lb · 4,255 kg
Rear PTOIndependent, engine-driven, 540/1000 rpm @ 1,901 engine rpm

Source · Traktorenlexikon, “Ford 7810”

What transmission does a 7810 have?

Transmission specifications for the 7810 are below.

Transmission — 7810 transmission specifications
SteeringHydrostatic BURMANN steering
Top speed18.6 mph · 30 km/h

Source · Traktorenlexikon, “Ford 7810”

How much does a 7810 weigh?

A 7810 weighs 7,749 lb (3,515 kg) unladen.

Weights & dimensions — 7810 weights and dimensions
Unladen weight7,749 lb · 3,515 kgtwo-wheel-drive version
Wheelbase99.1 in · 2,516 mmtwo-wheel-drive version
Length165.5 in · 4,204 mm
Width76.9 in · 1,953 mm
Height107.8 in · 2,739 mm
Ground clearance24.0 in · 610 mmtwo-wheel-drive version
Front track55.9–80.0 in · 1,420–2,032 mmtwo-wheel-drive version
Rear track59.8–89.8 in · 1,520–2,280 mm

Source · Traktorenlexikon, “Ford 7810”

Which tractors compare with a 7810?

Within 10% of its 96.7 hp of claimed engine power, the same type, and first built within 15 years of it.

Everything else people ask

Is a 7810 two-wheel drive or four-wheel drive?

The Ford 7810 was built in two-wheel drive (2WD) and four-wheel drive (4WD) versions, depending on configuration.

What PTO does a 7810 have?

A 7810 has a independent 540/1000 rpm rear PTO.

Where this page comes from

Compiled from Traktorenlexikon, “Ford 7810”.

Last verified

Not yet verified

Spotted an error?

Sources

Facts taken from these documents, units converted. Numbers beside a figure refer to this list. Licences and attribution

  1. Traktorenlexikon: Ford 7810CC BY-SA 4.0, WIKIBOOKS-TL-91156 · revision 917324. Wikibooks contributors (Traktorenlexikon). Original document