• Rigid chassis
  • WhichTractor size: Standard-size
  • Not independently tested
  • 1997–2005

It was ranked on an engine power figure whose source does not say gross or net. WhichTractor size, not the maker’s category

Derived by WhichTractor from a sourced three-point linkage. How we decide what a machine is

Deutz-Fahr Agroplus 100 Full specifications

The manufacturer claimed 97.8 horsepower. No laboratory has tested one, so there is no measured figure at the shaft.

Engine power, claimed · gross or net not stated

97.8 hp

72.9 kW as stated by the source

Not independently tested

Claimed · standard not stated by the source

Source · Traktorenlexikon, “Deutz-Fahr Agroplus 100”, claimed

Weight
9,855 lb
3-point lift
14,330 lb
Top speed
24.9 mph

Deutz-Fahr Agroplus 100 specs: key facts

  • The Deutz-Fahr Agroplus 100 was built from 1997 to 2005.

  • The Deutz-Fahr Agroplus 100 has a claimed engine power (gross or net not stated) of 72.9 kW (97.8 hp); it has no measured PTO figure.

  • The Deutz-Fahr Agroplus 100 was offered in two-wheel-drive and four-wheel-drive versions.

  • The Deutz-Fahr Agroplus 100 weighs 4,470 kg (9,855 lb) unladen.

  • The Deutz-Fahr Agroplus 100 has a rear PTO running at 540 rpm / 1000 rpm.

  • The three-point hitch of the Deutz-Fahr Agroplus 100 lifts 6,500 kg (14,330 lb) at the lower-link ends.

Source · Traktorenlexikon, “Deutz-Fahr Agroplus 100”

How much horsepower does an Agroplus 100 have?

The only figure for the Agroplus 100 is 97.8 hp (72.9 kW) of claimed engine power, gross or net not stated, no test standard stated — not power at the shaft.

Engine, claimed (gross/net not stated)
97.8 hp

Source · Traktorenlexikon, “Deutz-Fahr Agroplus 100”

How much will an Agroplus 100 lift?

An Agroplus 100 lifts 14,330 lb (6,500 kg) at the lower-link ends of its Category 2 three-point hitch.

Hydraulics & PTO — Agroplus 100 hydraulics and PTO specifications
SystemOpen centre
Hitch categoryCategory 2
Lift at ends14,330 lb · 6,500 kg
Rear PTO540 rpm / 1000 rpm @ 2,214 engine rpm

Source · Traktorenlexikon, “Deutz-Fahr Agroplus 100”

What transmission does an Agroplus 100 have?

Transmission specifications for the Agroplus 100 are below.

Transmission — Agroplus 100 transmission specifications
SteeringHydrostatic Danfoss steering type OSPC 125 OR
Top speed24.9 mph · 40 km/h

Source · Traktorenlexikon, “Deutz-Fahr Agroplus 100”

How much does an Agroplus 100 weigh?

An Agroplus 100 weighs 9,855 lb (4,470 kg) unladen.

Weights & dimensions — Agroplus 100 weights and dimensions
Unladen weight9,855 lb · 4,470 kg
Maximum permissible mass15,873 lb · 7,200 kg
Maximum front axle load6,614 lb · 3,000 kg
Maximum rear axle load11,023 lb · 5,000 kg
Wheelbase101.1 in · 2,568 mm
Length155.2 in · 3,943 mm
Width81.1 in · 2,060 mm
Height103.3 in · 2,624 mm
Ground clearance19.1 in · 484 mm
Front track56.1–84.0 in · 1,426–2,134 mm
Rear track57.3–80.5 in · 1,456–2,044 mm

Source · Traktorenlexikon, “Deutz-Fahr Agroplus 100”

Which tractors compare with an Agroplus 100?

Within 10% of its 97.8 hp of claimed engine power, the same type, and first built within 15 years of it.

Everything else people ask

Is an Agroplus 100 two-wheel drive or four-wheel drive?

The Deutz-Fahr Agroplus 100 was offered in two-wheel-drive and four-wheel-drive versions.

What PTO does an Agroplus 100 have?

An Agroplus 100 has a 540 rpm / 1000 rpm rear PTO.

Where this page comes from

Compiled from Traktorenlexikon, “Deutz-Fahr Agroplus 100”.

Last verified

Not yet verified

Spotted an error?

Sources

Facts taken from these documents, units converted. Numbers beside a figure refer to this list. Licences and attribution

  1. Traktorenlexikon: Deutz-Fahr Agroplus 100CC BY-SA 4.0, WIKIBOOKS-TL-89694 · revision 835214. Wikibooks contributors (Traktorenlexikon). Original document