8 material differences · fewer than 12

Tractor oneCase-IH 5230 (DT)1989–1997No measured PTO figureTractor twoDeutz-Fahr Agroplus 1001997–2005No measured PTO figure

Which should you choose?

Read our verdict on the 5230 (DT) and the Agroplus 100 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

8 material differences · 4 fields identical or within 5%, which is not counted as material

Case-IH 5230 (DT) and Deutz-Fahr Agroplus 100, field by field
Field	5230 (DT)	Agroplus 100	Gap
Engine
Engine power, claimed claimed	97.6 hp	97.8 hp	—
Engine declared	CUMMINS NCE 6-590	—	—
Displacement declared	5.88 L	—	—
Maximum torque declared	262 lb·ft · 355 N·m	282 lb·ft · 383 N·m	+8% Agroplus 100
Transmission
Top speed declared	15.5–24.9 mph · 25–40 km/h	24.9 mph · 40 km/h	differs
Hydraulics & hitch
Hydraulic centre declared	—	Open centre	—
Pump flow declared	19.9 gpm · 75.3 L/min	—	—
Three-point lift, at the coupling points declared	9,870 lb · 4,477 kg	14,330 lb · 6,500 kg	+45% Agroplus 100
Rear PTO speeds declared	540/1000 rpm	540 rpm / 1000 rpm	differs
Weight & dimensions
Unladen weight declared	9,877 lb · 4,480 kg	9,855 lb · 4,470 kg	—
Maximum permissible mass declared	—	15,873 lb · 7,200 kg	—
Wheelbase declared	103.7 in · 2,634 mm	101.1 in · 2,568 mm	—
Length declared	172.8 in · 4,390 mm	155.2 in · 3,943 mm	+11% 5230 (DT)
Width declared	96.0 in · 2,438 mm	81.1 in · 2,060 mm	+18% 5230 (DT)
Height, over the cab declared	106.1 in · 2,695 mm	103.3 in · 2,624 mm	—
Ground clearance declared	22.1 in · 561 mm	19.1 in · 484 mm	+16% 5230 (DT)
Turning radius, braked declared	13.5 ft · 4.13 m	—	—
Fuel tank declared	179.6 qt · 170.0 L	147.9 qt · 140 L	+21% 5230 (DT)

Source

Source