• WhichTractor size: Utility
  • No lab test on file
  • from 2009

It was ranked on an engine power figure whose source does not say gross or net. WhichTractor size, not the maker’s category

Derived by WhichTractor from a sourced three-point linkage. How we decide what a machine is

Deutz-Fahr Agroplus V 420 specs: hp, weight, years

Same 1000.4 WT four-cylinder diesel. The manufacturer claimed 94.7 horsepower. No laboratory has tested one, so there is no measured figure at the shaft.

Engine power, claimed · gross or net not stated

94.7 hp

70.6 kW as stated by the source

No lab test on file

Claimed · standard not stated by the source

Source · Traktorenlexikon, “Deutz-Fahr Agroplus V 420”, claimed

This is the maker’s own figure, measured at the engine. Power at the PTO is lower — by how much, for this machine, nobody has measured.

Weight
5,798 lb
Hyd. flow
14.3 gpm
Top speed
24.9 mph

Deutz-Fahr Agroplus V 420 specs: key facts

  • The Deutz-Fahr Agroplus V 420 was first built in 2009.

  • The Deutz-Fahr Agroplus V 420 has a claimed engine power (gross or net not stated) of 70.6 kW (94.7 hp); it has no measured PTO figure.

  • The Deutz-Fahr Agroplus V 420 is four-wheel drive (4WD).

  • The Deutz-Fahr Agroplus V 420 has a Same 1000.4 WT engine, a 4-cylinder 4.00 L diesel unit.Source 1

  • The Deutz-Fahr Agroplus V 420 weighs 2,630 kg (5,798 lb) unladen.

  • The Deutz-Fahr Agroplus V 420 has a rear PTO running at 540 rpm / 1000 rpm.

  • The hydraulic pump of the Deutz-Fahr Agroplus V 420 delivers 54.0 L/min (14.3 gpm).

Source · Traktorenlexikon, “Deutz-Fahr Agroplus V 420”

How does the Agroplus V 420 compare with its class?

  • Strength:

    30 forward gears is high for its class — 100% above the median of 15 across the 341 machines within 10% of its power that hold this figure.

  • Limitation:

    A 55 L fuel tank is low for its class — 58% below the median of 130 L across the 332 machines within 10% of its power that hold this figure.

  • Worth knowing:

    An unladen mass of 2,630 kg is low for its class — 35% below the median of 4,042 kg across the 353 machines within 10% of its power that hold this figure.

Derived by WhichTractor from 353 comparable records. How we work this out

Illustration of the 2009 Deutz-Fahr Agroplus V 420, a 95 hp farm tractor, a drawing generated from its specification record
Illustration — not a photograph

How much horsepower does an Agroplus V 420 have?

The only figure for the Agroplus V 420 is 94.7 hp (70.6 kW) of claimed engine power, gross or net not stated, no test standard stated — not power at the shaft.

Engine, claimed (gross/net not stated)
94.7 hp

Source · Traktorenlexikon, “Deutz-Fahr Agroplus V 420”

What engine is in an Agroplus V 420?

An Agroplus V 420 has a Same 1000.4 WT, a 4-cylinder 4.00 L diesel engine.

Engine — Agroplus V 420 engine specifications
Make & modelSame 1000.4 WT
Cylinders4, liquid-cooledSource 2
Displacement244.1 ci · 4.00 L

Source · Traktorenlexikon, “Deutz-Fahr Agroplus S 410”

How much will an Agroplus V 420 lift, and what is its hydraulic flow?

Hydraulic and PTO specifications for the Agroplus V 420 are below.

Hydraulics & PTO — Agroplus V 420 hydraulics and PTO specifications
SystemOpen centre
Pump flow14.3 gpm · 54.0 L/min
Rear PTO540 rpm / 1000 rpm

Source · Traktorenlexikon, “Deutz-Fahr Agroplus V 420”

What transmission does an Agroplus V 420 have?

Transmission specifications for the Agroplus V 420 are below.

Transmission — Agroplus V 420 transmission specifications
SteeringHydrostatic steering with height-adjustable steering wheel
Top speed24.9 mph · 40 km/h

Source · Traktorenlexikon, “Deutz-Fahr Agroplus V 420”

How much does an Agroplus V 420 weigh?

An Agroplus V 420 weighs 5,798 lb (2,630 kg) unladen.

Weights & dimensions — Agroplus V 420 weights and dimensions
Unladen weight5,798 lb · 2,630 kg
Wheelbase80.9 in · 2,056 mm
Length145.9 in · 3,706 mm
Height86.6 in · 2,200 mm
Ground clearance11.0 in · 280 mm
Front track36.2–40.9 in · 920–1,040 mm
Rear track33.7–50.4 in · 856–1,280 mm

Source · Traktorenlexikon, “Deutz-Fahr Agroplus V 420”

What oil does an Agroplus V 420 take, and how much?

An Agroplus V 420 engine takes 12.7 qt (12 L). Single source, not independently verified — always confirm against the operator’s manual for your machine.

Agroplus V 420 fluid capacities, grades and service intervals
SystemCapacity
Engine oil12.7 qt · 12 LSource: Traktorenlexikon, “Deutz-Fahr Agroplus V 420” · single source, not independently verified
Hydraulic43.3 qt · 41 LSource: Traktorenlexikon, “Deutz-Fahr Agroplus V 420” · single source, not independently verified
Cooling system13.7 qt · 13 LSource: Traktorenlexikon, “Deutz-Fahr Agroplus V 420” · single source, not independently verified

Always confirm against the operator’s manual for your machine before service.

Which tractors compare with an Agroplus V 420?

Within 10% of its 94.7 hp of claimed engine power, the same type, and first built within 15 years of it.

Common questions about the Deutz-Fahr Agroplus V 420

Is an Agroplus V 420 two-wheel drive or four-wheel drive?

The Deutz-Fahr Agroplus V 420 is four-wheel drive (4WD).

What PTO does an Agroplus V 420 have?

An Agroplus V 420 has a 540 rpm / 1000 rpm rear PTO.

Sources and how this page was built

Compiled from Traktorenlexikon, “Deutz-Fahr Agroplus S 410”; and Traktorenlexikon, “Deutz-Fahr Agroplus V 420”.

Sources checked

14 SEP 2026

Spotted an error?

Sources

Facts taken from these documents, units converted. Numbers beside a figure refer to this list. Licences and attribution

  1. Traktorenlexikon: Deutz-Fahr Agroplus S 410 — CC BY-SA 4.0, WIKIBOOKS-TL-89732 · revision 678263. Wikibooks contributors (Traktorenlexikon). Original document
  2. Traktorenlexikon: Deutz-Fahr Agroplus V 420 — CC BY-SA 4.0, WIKIBOOKS-TL-89741 · revision 990369. Wikibooks contributors (Traktorenlexikon). Original document