WhichTractor
  • Rigid chassis
  • WhichTractor size: Utility
  • No lab test on file
  • 1993–1998

WhichTractor size, not the maker’s category

Derived by WhichTractor from a sourced three-point linkage. How we decide what a machine is

CASE-INTERNATIONAL 4220 (DT) specs: hp, weight, years

IHC D-246 four-cylinder diesel. The manufacturer claimed 75.9 horsepower. No laboratory has tested one, so there is no measured figure at the shaft.

Engine power, claimed · gross or net not stated

75.9 hp

56.6 kW as stated by the source

No lab test on file

Claimed · standard not stated by the source

Source · Traktorenlexikon, “Case-IH 4220”, claimed

This is the maker’s own figure, measured at the engine. Power at the PTO is lower — by how much, for this machine, nobody has measured.

Weight
6,609 lb
3-point lift
7,055 lb
Hyd. flow
17.2 gpm
Top speed
21.7 mph

CASE-INTERNATIONAL 4220 (DT) specs: key facts

  • The CASE-INTERNATIONAL 4220 (DT) was built from 1993 to 1998.

  • The CASE-INTERNATIONAL 4220 (DT) has a claimed engine power (gross or net not stated) of 56.6 kW (75.9 hp); it has no measured PTO figure.

  • The CASE-INTERNATIONAL 4220 (DT) was offered in two-wheel-drive and four-wheel-drive versions.

  • The CASE-INTERNATIONAL 4220 (DT) has a IHC D-246 engine, a 4-cylinder 4.04 L diesel unit.

  • The CASE-INTERNATIONAL 4220 (DT) weighs 2,998 kg (6,609 lb) unladen.

  • The CASE-INTERNATIONAL 4220 (DT) has an independent rear PTO running at 540 rpm / 1000 rpm.

  • The three-point hitch of the CASE-INTERNATIONAL 4220 (DT) lifts 3,200 kg (7,055 lb) at the lower-link ends.

  • The hydraulic pump of the CASE-INTERNATIONAL 4220 (DT) delivers 65.0 L/min (17.2 gpm).

Source · Traktorenlexikon, “Case-IH 4220”

How does the 4220 (DT) compare with its class?

  • Strength:

    A hydraulic pump flow of 65 L/min is high for its class — 57% above the median of 41.4 L/min across the 330 machines within 10% of its power that hold this figure.

  • Limitation:

    Eight forward gears is low for its class — 33% below the median of 12 across the 405 machines within 10% of its power that hold this figure.

Derived by WhichTractor from 415 comparable records. How we work this out

Illustration of the 1993–1998 CASE-INTERNATIONAL 4220 (DT), a 76 hp farm tractor, four-wheel-drive version, a drawing generated from its specification record
Illustration — not a photograph · four-wheel-drive version

How much horsepower does a 4220 (DT) have?

The only figure for the 4220 (DT) is 75.9 hp (56.6 kW) of claimed engine power, gross or net not stated, no test standard stated — not power at the shaft.

Engine, claimed (gross/net not stated)
75.9 hp

Source · Traktorenlexikon, “Case-IH 4220”

What engine is in a 4220 (DT)?

A 4220 (DT) has an IHC D-246, a 4-cylinder 4.04 L diesel engine.

Engine — 4220 (DT) engine specifications
Make & modelIHC D-246
Cylinders4, liquid-cooled
Displacement246.4 ci · 4.04 L
Max torque189 lb·ft · 256 N·m @ 1,600 rpm
Injectiondirect injection
Electrical system12 V

Source · Traktorenlexikon, “Case-IH 4220”

How much will a 4220 (DT) lift, and what is its hydraulic flow?

A 4220 (DT) lifts 7,055 lb (3,200 kg) at the lower-link ends.

Hydraulics & PTO — 4220 (DT) hydraulics and PTO specifications
Pump flow17.2 gpm · 65.0 L/min
Pressure2,698 psi · 186 bar
Lift at ends7,055 lb · 3,200 kg
Rear PTOIndependent, engine-driven, 540 rpm / 1000 rpm @ 2,141 engine rpmEngages under load

Source · Traktorenlexikon, “Case-IH 4220”

What transmission does a 4220 (DT) have?

Transmission specifications for the 4220 (DT) are below.

Transmission — 4220 (DT) transmission specifications
ClutchPedal-operated dry Rockford single-disc clutch
BrakesPedal-operated wet disc brake acting on differential side shafts
SteeringHydrostatic Danfoss steering
Top speed21.7 mph · 35 km/h

Source · Traktorenlexikon, “Case-IH 4220”

How much does a 4220 (DT) weigh?

A 4220 (DT) weighs 6,609 lb (2,998 kg) unladen.

Weights & dimensions — 4220 (DT) weights and dimensions
Unladen weight6,609 lb · 2,998 kgDT: 3,392
Wheelbase88.0 in · 2,235 mm
Length147.6 in · 3,749 mm
Width73.0–92.7 in · 1,854–2,354 mm
Height104.3 in · 2,649 mm
Front track54.0–79.0 in · 1,372–2,007 mmDT: 1,364-1,824
Rear track56.1–75.8 in · 1,425–1,925 mm

Source · Traktorenlexikon, “Case-IH 4220”

What oil does a 4220 (DT) take, and how much?

A 4220 (DT) engine takes 10.4 qt (9.8 L). Single source, not independently verified — always confirm against the operator’s manual for your machine.

4220 (DT) fluid capacities, grades and service intervals
SystemCapacity
Engine oil10.4 qt · 9.8 LSource: Traktorenlexikon, “Case-IH 4220” · single source, not independently verified
Transmission38.6 qt · 36.5 LSource: Traktorenlexikon, “Case-IH 4220” · single source, not independently verified
Front axle5.3 qt · 5.0 LSource: Traktorenlexikon, “Case-IH 4220” · single source, not independently verified
Cooling system14.5 qt · 13.7 LSource: Traktorenlexikon, “Case-IH 4220” · single source, not independently verified

Always confirm against the operator’s manual for your machine before service.

Which tractors compare with a 4220 (DT)?

Within 10% of its 75.9 hp of claimed engine power, the same type, and first built within 15 years of it.

Common questions about the CASE-INTERNATIONAL 4220 (DT)

Is a 4220 (DT) two-wheel drive or four-wheel drive?

The CASE-INTERNATIONAL 4220 (DT) was offered in two-wheel-drive and four-wheel-drive versions.

What PTO does a 4220 (DT) have?

A 4220 (DT) has a independent 540 rpm / 1000 rpm rear PTO.

Sources and how this page was built

Compiled from Traktorenlexikon, “Case-IH 4220”.

Sources checked

14 SEP 2026

Spotted an error?

Sources

Facts taken from these documents, units converted. Numbers beside a figure refer to this list. Licences and attribution

  1. Traktorenlexikon: Case-IH 4220 — CC BY-SA 4.0, WIKIBOOKS-TL-27260 · revision 1015492. Wikibooks contributors (Traktorenlexikon). Original document