10 material differences · fewer than 12

Tractor oneCASE-INTERNATIONAL 4220 (DT)1993–1998No measured PTO figureTractor twoZETOR 7321/7341 Super1997–2004No measured PTO figure

Which should you choose?

Read our verdict on the 4220 (DT) and the 7321/7341 Super → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

10 material differences · 5 fields identical or within 5%, which is not counted as material

CASE-INTERNATIONAL 4220 (DT) and ZETOR 7321/7341 Super, field by field
Field	4220 (DT)	7321/7341 Super	Gap
Engine
Engine power, claimed claimed	75.9 hp	75.9 hp	—
Engine declared	IHC D-246	ZETOR Z-7302	differs
Displacement declared	4.04 L	3.92 L	—
Maximum torque declared	189 lb·ft · 256 N·m	221 lb·ft · 300 N·m	+17% 7321/7341 Super
Transmission
Top speed declared	21.7 mph · 35 km/h	18.6–24.9 mph · 30–40 km/h	differs
Clutch declared	Pedal-operated dry Rockford single-disc clutch	Pedal operated driving clutch with 310 mm disc diameter	differs
Hydraulics & hitch
Hydraulic control declared	—	Constant flow	—
Pump flow declared	17.2 gpm · 65.0 L/min	14.2 gpm · 53.8 L/min	+21% 4220 (DT)
Pressure declared	2,698 psi · 186 bar	1,740 psi · 120 bar	+55% 4220 (DT)
Rear PTO speeds declared	540 rpm / 1000 rpm	540/1000 rpm	differs
Weight & dimensions
Unladen weight declared	6,609 lb · 2,998 kg	7,264 lb · 3,295 kg	+10% 7321/7341 Super
Maximum permissible mass declared	—	11,905 lb · 5,400 kg	—
Wheelbase declared	88.0 in · 2,235 mm	88.9 in · 2,257 mm	—
Length declared	147.6 in · 3,749 mm	132.7 in · 3,370 mm	+11% 4220 (DT)
Width declared	73.0–92.7 in · 1,854–2,354 mm	75.8–88.6 in · 1,925–2,250 mm	—
Height, over the cab declared	104.3 in · 2,649 mm	103.9 in · 2,640 mm	—
Ground clearance declared	—	17.5 in · 444 mm	—
Turning radius, braked declared	—	11.0 ft · 3.35 m	—
Fuel tank declared	118.3 qt · 112.0 L	126.8 qt · 120.0 L	+7% 7321/7341 Super

Source

Source