11 material differences · fewer than 12

Tractor oneCASE-INTERNATIONAL 4220 (DT)1993–1998No measured PTO figureTractor twoDeutz-Fahr Agroplus 802001–2005No measured PTO figure

Which should you choose?

Read our verdict on the 4220 (DT) and the Agroplus 80 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

11 material differences · 3 fields identical or within 5%, which is not counted as material

CASE-INTERNATIONAL 4220 (DT) and Deutz-Fahr Agroplus 80, field by field
Field	4220 (DT)	Agroplus 80	Gap
Engine
Engine power, claimed claimed	75.9 hp	76.0 hp	—
Engine declared	IHC D-246	KHD F4L 913 or F4L 914	differs
Displacement declared	4.04 L	—	—
Maximum torque declared	189 lb·ft · 256 N·m	204 lb·ft · 276 N·m	+8% Agroplus 80
Transmission
Top speed declared	21.7 mph · 35 km/h	24.9 mph · 40 km/h	+14% Agroplus 80
Clutch declared	Pedal-operated dry Rockford single-disc clutch	Mechanically-operated dry Borg & Beck single clutch, type: 305	differs
Hydraulics & hitch
Hydraulic centre declared	—	Open centre	—
Pump flow declared	17.2 gpm · 65.0 L/min	12.7 gpm · 48.0 L/min	+35% 4220 (DT)
Pressure declared	2,698 psi · 186 bar	2,031 psi · 140 bar	+33% 4220 (DT)
Rear PTO speeds declared	540 rpm / 1000 rpm	540 rpm / 1000 rpm	—
Weight & dimensions
Unladen weight declared	6,609 lb · 2,998 kg	6,063 lb · 2,750 kg	+9% 4220 (DT)
Maximum permissible mass declared	—	9,921 lb · 4,500 kg	—
Wheelbase declared	88.0 in · 2,235 mm	88.0 in · 2,235 mm	—
Length declared	147.6 in · 3,749 mm	159.8 in · 4,060 mm	+8% Agroplus 80
Width declared	73.0–92.7 in · 1,854–2,354 mm	79.1 in · 2,008 mm	differs
Height, over the cab declared	104.3 in · 2,649 mm	96.7 in · 2,455 mm	+8% 4220 (DT)
Ground clearance declared	—	17.5 in · 445 mm	—
Fuel tank declared	118.3 qt · 112.0 L	95.1 qt · 90 L	+24% 4220 (DT)

Source

Source