- Rigid chassis
- WhichTractor size: Utility
- No lab test on file
- 1993–1998
WhichTractor size, not the maker’s category
CASE-INTERNATIONAL 4220 (DT) Hydraulics & PTO specs
12 hydraulics and PTO values on record for the 4220 (DT).
Engine power, claimed · gross or net not stated
75.9 hp
56.6 kW as stated by the source
No lab test on file
Claimed · standard not stated by the source
Source · Traktorenlexikon, “Case-IH 4220”, claimed
This is the maker’s own figure, measured at the engine. Power at the PTO is lower — by how much, for this machine, nobody has measured.
How much will a 4220 (DT) lift?
A 4220 (DT) lifts 7,055 lb (3,200 kg) at the lower-link ends.
| Pump flow | 17.2 gpm · 65.0 L/min |
|---|---|
| Steering pump flow | 3.0 gpm · 11.3 L/min |
| Hydraulic pressure | 2,698 psi · 186 bar |
| Rear remote valves | 3 |
| Lift capacity at ball ends | 7,055 lb · 3,200 kg |
| Front hitch available, optional | Yes |
Source · Traktorenlexikon, “Case-IH 4220”
What PTO does a 4220 (DT) have?
A 4220 (DT) has a 540 rpm / 1000 rpm rear PTO.
| Rear PTO drive | Engine-driven |
|---|---|
| Rear PTO independence | Independent |
| PTO engages under load | Yes |
| Rear PTO speeds | 540 rpm / 1000 rpm |
| Engine speed at 540 PTO | 2,141 rpm |
| Front PTO available, optional | Yes |
Source · Traktorenlexikon, “Case-IH 4220”
Sources and how this page was built
12 hydraulics and PTO values from Traktorenlexikon, “Case-IH 4220”.
Sources
Facts taken from these documents, units converted. Numbers beside a figure refer to this list. Licences and attribution
- Traktorenlexikon: Case-IH 4220 — CC BY-SA 4.0, WIKIBOOKS-TL-27260 · revision 1015492. Wikibooks contributors (Traktorenlexikon). Original document