7 material differences · fewer than 12

Tractor oneCASE-INTERNATIONAL 4220 (DT)1993–1998No measured PTO figureTractor twoMassey Ferguson MF 390 (A)1987–1997No measured PTO figure

Which should you choose?

Read our verdict on the 4220 (DT) and the MF 390 (A) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

7 material differences · 9 fields identical or within 5%, which is not counted as material

CASE-INTERNATIONAL 4220 (DT) and Massey Ferguson MF 390 (A), field by field
Field	4220 (DT)	MF 390 (A)	Gap
Engine
Engine power, claimed claimed	75.9 hp	76.0 hp	—
Engine declared	IHC D-246	Perkins A 4.248	differs
Displacement declared	4.04 L	4.07 L	—
Maximum torque declared	189 lb·ft · 256 N·m	200 lb·ft · 271 N·m	+6% MF 390 (A)
Transmission
Top speed declared	21.7 mph · 35 km/h	18.6–24.9 mph · 30–40 km/h	differs
Clutch declared	Pedal-operated dry Rockford single-disc clutch	pedal-operated dry and air-cooled single clutch	differs
Hydraulics & hitch
Pump flow declared	17.2 gpm · 65.0 L/min	16.7 gpm · 63.3 L/min	—
Pressure declared	2,698 psi · 186 bar	2,466 psi · 170 bar	+9% 4220 (DT)
Three-point lift, at the coupling points declared	7,055 lb · 3,200 kg	6,746 lb · 3,060 kg	—
Rear PTO speeds declared	540 rpm / 1000 rpm	540 rpm / 1000 rpm	—
Weight & dimensions
Unladen weight declared	6,609 lb · 2,998 kg	6,601 lb · 2,994 kg	—
Wheelbase declared	88.0 in · 2,235 mm	84.1 in · 2,136 mm	—
Length declared	147.6 in · 3,749 mm	144.5 in · 3,670 mm	—
Width declared	73.0–92.7 in · 1,854–2,354 mm	76.4 in · 1,940 mm	differs
Height, over the cab declared	104.3 in · 2,649 mm	97.2 in · 2,470 mm	+7% 4220 (DT)
Ground clearance declared	—	11.6 in · 295 mm	—
Fuel tank declared	118.3 qt · 112.0 L	114.1 qt · 108 L	—

Source

Source