10 material differences · fewer than 12

Tractor oneCASE-INTERNATIONAL 4220 (DT)1993–1998No measured PTO figureTractor twoLandini 8800 (DT)1987–2000No measured PTO figure

Which should you choose?

Read our verdict on the 4220 (DT) and the 8800 (DT) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

10 material differences · 5 fields identical or within 5%, which is not counted as material

CASE-INTERNATIONAL 4220 (DT) and Landini 8800 (DT), field by field
Field	4220 (DT)	8800 (DT)	Gap
Engine
Engine power, claimed claimed	75.9 hp	75.9 hp	—
Engine declared	IHC D-246	PERKINS LF 4.248	differs
Displacement declared	4.04 L	4.07 L	—
Maximum torque declared	189 lb·ft · 256 N·m	185 lb·ft · 251 N·m	—
Transmission
Top speed declared	21.7 mph · 35 km/h	18.6 mph · 30 km/h	+17% 4220 (DT)
Clutch declared	Pedal-operated dry Rockford single-disc clutch	Pedal-operated dry single-disc clutch	differs
Hydraulics & hitch
Pump flow declared	17.2 gpm · 65.0 L/min	13.6 gpm · 51.5 L/min	+26% 4220 (DT)
Pressure declared	2,698 psi · 186 bar	—	—
Three-point lift, at the coupling points declared	7,055 lb · 3,200 kg	7,397 lb · 3,355 kg	—
Rear PTO speeds declared	540 rpm / 1000 rpm	540/1000 rpm	differs
Weight & dimensions
Unladen weight declared	6,609 lb · 2,998 kg	8,422 lb · 3,820 kg	+27% 8800 (DT)
Wheelbase declared	88.0 in · 2,235 mm	93.3 in · 2,371 mm	+6% 8800 (DT)
Length declared	147.6 in · 3,749 mm	155.9 in · 3,959 mm	+6% 8800 (DT)
Width declared	73.0–92.7 in · 1,854–2,354 mm	78.3 in · 1,990 mm	differs
Height, over the cab declared	104.3 in · 2,649 mm	105.5 in · 2,680 mm	—
Ground clearance declared	—	14.1 in · 357 mm	—
Fuel tank declared	118.3 qt · 112.0 L	156.4 qt · 148.0 L	+32% 8800 (DT)

Source

Source