- Vehicle type: unspecified
- Rigid chassis
- WhichTractor size: Utility
- No lab test on file
- 1993–1998
WhichTractor size, not the maker’s category
We looked and the record does not say what this machine is. How we decide what a machine is
CASE-INTERNATIONAL 4210 (DT) specs: hp, weight, years
IHC D-239 four-cylinder diesel. The manufacturer claimed 69.1 horsepower. No laboratory has tested one, so there is no measured figure at the shaft.
Engine power, claimed · gross or net not stated
69.1 hp
51.5 kW as stated by the source
No lab test on file
Claimed · standard not stated by the source
Source · Traktorenlexikon, “Case-IH 4210”, claimed
This is the maker’s own figure, measured at the engine. Power at the PTO is lower — by how much, for this machine, nobody has measured.
- Weight
- 6,832 lb
- 3-point lift
- 6,393 lb
- Top speed
- 21.7 mph
CASE-INTERNATIONAL 4210 (DT) specs: key facts
The CASE-INTERNATIONAL 4210 (DT) was built from 1993 to 1998.
The CASE-INTERNATIONAL 4210 (DT) has a claimed engine power (gross or net not stated) of 51.5 kW (69.1 hp); it has no measured PTO figure.
The CASE-INTERNATIONAL 4210 (DT) was offered in two-wheel-drive and four-wheel-drive versions.
The CASE-INTERNATIONAL 4210 (DT) has a IHC D-239 engine, a 4-cylinder 3.91 L diesel unit.
The CASE-INTERNATIONAL 4210 (DT) weighs 3,099 kg (6,832 lb) unladen.
The CASE-INTERNATIONAL 4210 (DT) has an independent rear PTO running at 540 rpm / 1000 rpm.
The three-point hitch of the CASE-INTERNATIONAL 4210 (DT) lifts 2,900 kg (6,393 lb) at the lower-link ends.
Source · Traktorenlexikon, “Case-IH 4210”
How does the 4210 (DT) compare with its class?
- Limitation:
Eight forward gears is low for its class — 33% below the median of 12 across the 384 machines within 10% of its power that hold this figure.
Derived by WhichTractor from 393 comparable records. How we work this out
How much horsepower does a 4210 (DT) have?
The only figure for the 4210 (DT) is 69.1 hp (51.5 kW) of claimed engine power, gross or net not stated, no test standard stated — not power at the shaft.
Source · Traktorenlexikon, “Case-IH 4210”
What engine is in a 4210 (DT)?
A 4210 (DT) has an IHC D-239, a 4-cylinder 3.91 L diesel engine.
| Make & model | IHC D-239 |
|---|---|
| Cylinders | 4, liquid-cooled |
| Displacement | 238.5 ci · 3.91 L |
| Max torque | 184 lb·ft · 250 N·m @ 1,600 rpm |
| Electrical system | 12 V |
Source · Traktorenlexikon, “Case-IH 4210”
How much will a 4210 (DT) lift?
A 4210 (DT) lifts 6,393 lb (2,900 kg) at the lower-link ends.
| Pressure | 2,698 psi · 186 bar |
|---|---|
| Lift at ends | 6,393 lb · 2,900 kg |
| Rear PTO | Independent, engine-driven, 540 rpm / 1000 rpm @ 2,141 engine rpmEngages under load |
Source · Traktorenlexikon, “Case-IH 4210”
What transmission does a 4210 (DT) have?
Transmission specifications for the 4210 (DT) are below.
| Steering | Hydrostatic Danfoss steering with double-acting Carraro steering cylinder |
|---|---|
| Top speed | 21.7 mph · 35 km/h |
Source · Traktorenlexikon, “Case-IH 4210”
How much does a 4210 (DT) weigh?
A 4210 (DT) weighs 6,832 lb (3,099 kg) unladen.
| Unladen weight | 6,832 lb · 3,099 kgDT: 3,319 |
|---|---|
| Wheelbase | 88.7 in · 2,253 mmDT: 2,235 |
| Length | 148.0 in · 3,759 mm |
| Width | 73.0–92.7 in · 1,854–2,354 mm |
| Height | 105.0 in · 2,666 mm |
| Front track | 54.0–79.0 in · 1,372–2,007 mmDT: 1,364-1,824 |
| Rear track | 56.1–75.8 in · 1,425–1,925 mm |
Source · Traktorenlexikon, “Case-IH 4210”
What oil does a 4210 (DT) take, and how much?
A 4210 (DT) engine takes 10.4 qt (9.8 L). Single source, not independently verified — always confirm against the operator’s manual for your machine.
| System | Capacity |
|---|---|
| Engine oil | 10.4 qt · 9.8 LSource: Traktorenlexikon, “Case-IH 4210” · single source, not independently verified |
| Transmission | 38.6 qt · 36.5 LSource: Traktorenlexikon, “Case-IH 4210” · single source, not independently verified |
| Front axle | 5.3 qt · 5.0 LSource: Traktorenlexikon, “Case-IH 4210” · single source, not independently verified |
| Cooling system | 14.5 qt · 13.7 LSource: Traktorenlexikon, “Case-IH 4210” · single source, not independently verified |
Always confirm against the operator’s manual for your machine before service.
Which tractors compare with a 4210 (DT)?
Within 10% of its 69.1 hp of claimed engine power, the same type, and first built within 15 years of it.
- Fiat 72-94 (DT)69.1 hp engine, claimed · 1993–1996Side by side with the 4210 (DT) →
- Hürlimann H-307 XE69.1 hp engine, claimed · 1993–2004Side by side with the 4210 (DT) →
- John Deere 2300 (A)69.1 hp engine, claimed · 1993–1996Side by side with the 4210 (DT) →
- Lamborghini 574-70 (DT)69.1 hp engine, claimed · 1993–2004Side by side with the 4210 (DT) →
- SAME Argon 7069.1 hp engine, claimed · 1993–2004Side by side with the 4210 (DT) →
- VALMET 465 (465-4)69.1 hp engine, claimed · 1993–1997Side by side with the 4210 (DT) →
Common questions about the CASE-INTERNATIONAL 4210 (DT)
Is a 4210 (DT) two-wheel drive or four-wheel drive?
The CASE-INTERNATIONAL 4210 (DT) was offered in two-wheel-drive and four-wheel-drive versions.
What PTO does a 4210 (DT) have?
A 4210 (DT) has a independent 540 rpm / 1000 rpm rear PTO.
Sources and how this page was built
Compiled from Traktorenlexikon, “Case-IH 4210”.
Sources
Facts taken from these documents, units converted. Numbers beside a figure refer to this list. Licences and attribution
- Traktorenlexikon: Case-IH 4210 — CC BY-SA 4.0, WIKIBOOKS-TL-27259 · revision 975658. Wikibooks contributors (Traktorenlexikon). Original document