5 material differences · fewer than 12
Tractor oneCASE-INTERNATIONAL 4210 (DT)1993–1998No measured PTO figureTractor twoJohn Deere 2300 (A)1993–1996No measured PTO figure
Which should you choose?
Read our verdict on the 4210 (DT) and the 2300 (A) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
5 material differences · 8 fields identical or within 5%, which is not counted as material
| Field | 4210 (DT) | 2300 (A) | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 69.1 hp | 69.1 hp | — |
| Engine declared | IHC D-239 | ZETOR 7701 | differs |
| Displacement declared | 3.91 L | 3.92 L | — |
| Maximum torque declared | 184 lb·ft · 250 N·m | 182 lb·ft · 247 N·m | — |
| Transmission | |||
| Top speed declared | 21.7 mph · 35 km/h | 18.6 mph · 30 km/h | +17% 4210 (DT) |
| Hydraulics & hitch | |||
| Pump flow declared | — | 10.6 gpm · 40.2 L/min | — |
| Pressure declared | 2,698 psi · 186 bar | 1,160 psi · 80 bar | +133% 4210 (DT) |
| Rear PTO speeds declared | 540 rpm / 1000 rpm | 540/1000 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 6,832 lb · 3,099 kg | 7,187 lb · 3,260 kg | — |
| Maximum permissible mass declared | — | 12,346 lb · 5,600 kg | — |
| Wheelbase declared | 88.7 in · 2,253 mm | 88.8 in · 2,256 mm | — |
| Length declared | 148.0 in · 3,759 mm | 148.6 in · 3,775 mm | — |
| Width declared | 73.0–92.7 in · 1,854–2,354 mm | 73.8–88.6 in · 1,875–2,250 mm | — |
| Height, over the cab declared | 105.0 in · 2,666 mm | 104.9 in · 2,665 mm | — |
| Ground clearance declared | — | 16.1 in · 410 mm | — |
| Fuel tank declared | 118.3 qt · 112.0 L | 100.4 qt · 95.0 L | +18% 4210 (DT) |
CASE-INTERNATIONAL 4210 (DT) sources
Source
- Source: Traktorenlexikon, “Case-IH 4210”
John Deere 2300 (A) sources
Source
- Source: Traktorenlexikon, “John Deere 2300”