11 material differences · fewer than 12

Tractor oneCASE-INTERNATIONAL 4210 (DT)1993–1998No measured PTO figureTractor twoFiat 72-94 (DT)1993–1996No measured PTO figure

Which should you choose?

Read our verdict on the 4210 (DT) and the 72-94 (DT) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

11 material differences · 3 fields identical or within 5%, which is not counted as material

CASE-INTERNATIONAL 4210 (DT) and Fiat 72-94 (DT), field by field
Field	4210 (DT)	72-94 (DT)	Gap
Engine
Engine power, claimed claimed	69.1 hp	69.1 hp	—
Engine declared	IHC D-239	Fiat-Iveco 8045.06	differs
Displacement declared	3.91 L	3.61 L	+8% 4210 (DT)
Maximum torque declared	184 lb·ft · 250 N·m	165 lb·ft · 224 N·m	+12% 4210 (DT)
Transmission
Top speed declared	21.7 mph · 35 km/h	18.6–24.9 mph · 30–40 km/h	differs
Hydraulics & hitch
Pump flow declared	—	11.8 gpm · 44.5 L/min	—
Pressure declared	2,698 psi · 186 bar	3,263–3,408 psi · 225–235 bar	differs
Three-point lift, at the coupling points declared	6,393 lb · 2,900 kg	7,716 lb · 3,500 kg	+21% 72-94 (DT)
Rear PTO speeds declared	540 rpm / 1000 rpm	540/1000 rpm	differs
Weight & dimensions
Unladen weight declared	6,832 lb · 3,099 kg	7,628 lb · 3,460 kg	+12% 72-94 (DT)
Maximum permissible mass declared	—	11,684 lb · 5,300 kg	—
Wheelbase declared	88.7 in · 2,253 mm	92.1 in · 2,340 mm	—
Length declared	148.0 in · 3,759 mm	139.8 in · 3,550 mm	+6% 4210 (DT)
Width declared	73.0–92.7 in · 1,854–2,354 mm	85.0 in · 2,160 mm	differs
Height, over the cab declared	105.0 in · 2,666 mm	103.5 in · 2,630 mm	—
Ground clearance declared	—	20.1 in · 510 mm	—
Fuel tank declared	118.3 qt · 112.0 L	98.3 qt · 93.0 L	+20% 4210 (DT)

Source

Source