9 material differences · fewer than 12

Tractor oneCASE-INTERNATIONAL 4210 (DT)1993–1998No measured PTO figureTractor twoHürlimann H-307 XE1993–2004No measured PTO figure

Which should you choose?

Read our verdict on the 4210 (DT) and the H-307 XE → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

9 material differences · 4 fields identical or within 5%, which is not counted as material

CASE-INTERNATIONAL 4210 (DT) and Hürlimann H-307 XE, field by field
Field	4210 (DT)	H-307 XE	Gap
Engine
Engine power, claimed claimed	69.1 hp	69.1 hp	—
Engine declared	IHC D-239	Hürlimann H-1000.3 AT	differs
Displacement declared	3.91 L	3.00 L	+30% 4210 (DT)
Maximum torque declared	184 lb·ft · 250 N·m	178 lb·ft · 241 N·m	—
Transmission
Top speed declared	21.7 mph · 35 km/h	18.6–24.9 mph · 30–40 km/h	differs
Clutch declared	—	Dry SLH double clutch	—
Hydraulics & hitch
Hydraulic control declared	—	Load sensing	—
Pump flow declared	—	7.9 gpm · 30.0 L/min	—
Pressure declared	2,698 psi · 186 bar	3,046 psi · 210 bar	+13% H-307 XE
Rear PTO speeds declared	540 rpm / 1000 rpm	540 rpm / 1000 rpm	—
Weight & dimensions
Unladen weight declared	6,832 lb · 3,099 kg	5,908 lb · 2,680 kg	+16% 4210 (DT)
Wheelbase declared	88.7 in · 2,253 mm	80.9 in · 2,056 mm	+10% 4210 (DT)
Length declared	148.0 in · 3,759 mm	144.9 in · 3,680 mm	—
Width declared	73.0–92.7 in · 1,854–2,354 mm	72.4 in · 1,840 mm	differs
Height, over the cab declared	105.0 in · 2,666 mm	92.3 in · 2,345 mm	+14% 4210 (DT)
Ground clearance declared	—	14.4 in · 365 mm	—
Turning radius, braked declared	—	10.0 ft · 3.05 m	—
Fuel tank declared	118.3 qt · 112.0 L	61.3 qt · 58.0 L	+93% 4210 (DT)

Source

Source