9 material differences · fewer than 12
Tractor oneCASE-INTERNATIONAL 4210 (DT)1993–1998No measured PTO figureTractor twoSAME Argon 701993–2004No measured PTO figure
Which should you choose?
Read our verdict on the 4210 (DT) and the Argon 70 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
9 material differences · 3 fields identical or within 5%, which is not counted as material
| Field | 4210 (DT) | Argon 70 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 69.1 hp | 69.1 hp | — |
| Engine declared | IHC D-239 | SAME 1000.3 AT | differs |
| Displacement declared | 3.91 L | 3.00 L | +30% 4210 (DT) |
| Maximum torque declared | 184 lb·ft · 250 N·m | 188 lb·ft · 255 N·m | — |
| Transmission | |||
| Top speed declared | 21.7 mph · 35 km/h | 18.6–24.9 mph · 30–40 km/h | differs |
| Clutch declared | — | Dry S.L.H. double clutch | — |
| Hydraulics & hitch | |||
| Hydraulic control declared | — | Load sensing | — |
| Pump flow declared | — | 12.4 gpm · 47.0 L/min | — |
| Pressure declared | 2,698 psi · 186 bar | 2,176 psi · 150 bar | +24% 4210 (DT) |
| Rear PTO speeds declared | 540 rpm / 1000 rpm | 540/540E rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 6,832 lb · 3,099 kg | 5,732 lb · 2,600 kg | +19% 4210 (DT) |
| Maximum permissible mass declared | — | 10,141 lb · 4,600 kg | — |
| Wheelbase declared | 88.7 in · 2,253 mm | 80.9 in · 2,056 mm | +10% 4210 (DT) |
| Length declared | 148.0 in · 3,759 mm | 141.3 in · 3,590 mm | — |
| Width declared | 73.0–92.7 in · 1,854–2,354 mm | 70.1–85.8 in · 1,780–2,180 mm | differs |
| Ground clearance declared | — | 14.8 in · 375 mm | — |
| Turning radius, braked declared | — | 10.0 ft · 3.05 m | — |
| Fuel tank declared | 118.3 qt · 112.0 L | 61.3 qt · 58.0 L | +93% 4210 (DT) |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
CASE-INTERNATIONAL 4210 (DT) sources
- Source: Traktorenlexikon, “Case-IH 4210”
SAME Argon 70 sources
- Source: Traktorenlexikon, “SAME Argon 70”