AGRIFULL 80-105 DT vs DEUTZ-ALLIS 8010
9 material differences · fewer than 12
Which should you choose?
Read our verdict on the 80-105 DT and the 8010 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
9 material differences · 3 fields identical or within 5%, which is not counted as material
| Field | 80-105 DT | 8010 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 105.5 hp | 105.5 hp | — |
| Engine declared | V.M.-MOTORI 1056 SU | ALLIS-CHALMERS 649 T | differs |
| Displacement declared | 5.71 L | 4.93 L | +16% 80-105 DT |
| Transmission | |||
| Top speed declared | 15.5 mph · 25 km/h | 18.6 mph · 30 km/h | +20% 8010 |
| Hydraulics & hitch | |||
| Hydraulic centre declared | — | Open centre | — |
| Pump flow declared | 7.4 gpm · 28.0 L/min | 45.0 gpm · 170.3 L/min | +508% 8010 |
| Pressure declared | 3,118 psi · 215 bar | — | — |
| Rear PTO speeds declared | 540/1000 rpm | 540/1000 rpm | — |
| Weight & dimensions | |||
| Unladen weight declared | 8,686 lb · 3,940 kg | 12,630 lb · 5,729 kg | +45% 8010 |
| Wheelbase declared | 104.3 in · 2,650 mm | 106.0 in · 2,692 mm | — |
| Length declared | 163.8 in · 4,160 mm | 187.0 in · 4,750 mm | +14% 8010 |
| Width declared | 105.1 in · 2,670 mm | 92.6 in · 2,352 mm | +14% 80-105 DT |
| Height declared | 104.3 in · 2,650 mm | 114.0 in · 2,896 mm | +9% 8010 |
| Ground clearance declared | 15.4 in · 390 mm | 21.0 in · 533 mm | +37% 8010 |
| Turning radius, braked declared | — | 12.0 ft · 3.67 m | — |
| Fuel tank declared | — | 239.9 qt · 227.0 L | — |
AGRIFULL 80-105 DT sources
Source
- Source: Traktorenlexikon, “Agrifull 80-105”
DEUTZ-ALLIS 8010 sources
Source
- Source: Traktorenlexikon, “Deutz-Allis 8010”