- Rigid chassis
- WhichTractor size: Utility
- Not independently tested
- 1993–1996
WhichTractor size, not the maker’s category
Derived by WhichTractor from a sourced three-point linkage. How we decide what a machine is
VALMET 4400 Full specifications
VALMET 320 DS three-cylinder diesel. The manufacturer claimed 66.1 horsepower. No laboratory has tested one, so there is no measured figure at the shaft.
Engine power, claimed · gross or net not stated
66.1 hp
49.3 kW as stated by the source
Not independently tested
Claimed · standard not stated by the source
Source · Traktorenlexikon, “Valmet 4400”, claimed
- Weight
- 6,151 lb
- 3-point lift
- 6,294 lb
- Hyd. flow
- 10.3 gpm
- Top speed
- 18.6 mph
VALMET 4400 specs: key facts
The VALMET 4400 was built from 1993 to 1996.
The VALMET 4400 has a claimed engine power (gross or net not stated) of 49.3 kW (66.1 hp); it has no measured PTO figure.
The VALMET 4400 was built in two-wheel drive (2WD) and four-wheel drive (4WD) versions, depending on configuration.
The VALMET 4400 has a VALMET 320 DS engine, a 3-cylinder 3.30 L diesel unit.Source 2
The VALMET 4400 weighs 2,790 kg (6,151 lb) unladen.
The VALMET 4400 has an independent rear PTO running at 540E/540 rpm.
The three-point hitch of the VALMET 4400 lifts 2,855 kg (6,294 lb) at the lower-link ends.
The hydraulic pump of the VALMET 4400 delivers 39.0 L/min (10.3 gpm).
Source · Traktorenlexikon, “Valmet 4400”
How much horsepower does a 4400 have?
The only figure for the 4400 is 66.1 hp (49.3 kW) of claimed engine power, gross or net not stated, no test standard stated — not power at the shaft.
Source · Traktorenlexikon, “Valmet 4400”
What engine is in a 4400?
A 4400 has a VALMET 320 DS, a 3-cylinder 3.30 L diesel engine.
| Make & model | VALMET 320 DSSource 2 |
|---|---|
| Cylinders | 3, liquid-cooledSource 2 |
| Displacement | 201.3 ci · 3.30 LSource 2 |
| Max torque | 177 lb·ft · 240 N·m @ 1,450 rpm |
| Injection | Direct injection |
| Electrical system | 12 V |
Source · Traktorenlexikon, “Valmet 4400”
How much will a 4400 lift, and what is its hydraulic flow?
A 4400 lifts 6,294 lb (2,855 kg) at the lower-link ends of its Category 2 three-point hitch.
| Pump flow | 10.3 gpm · 39.0 L/min |
|---|---|
| Pressure | 2,901 psi · 200 bar |
| Hitch category | Category 2 |
| Lift at ends | 6,294 lb · 2,855 kg |
| Rear PTO | Independent, engine-driven, 540E/540 rpm @ 1,890 engine rpmEngages under load |
Source · Traktorenlexikon, “Valmet 4400”
What transmission does a 4400 have?
Transmission specifications for the 4400 are below.
| Clutch | Dry double clutch |
|---|---|
| Brakes | Pedal-operated hydraulic wet multi-disc brake acting on differential side shafts |
| Steering | Hydrostatic steering |
| Top speed | 18.6 mph · 30 km/h |
Source · Traktorenlexikon, “Valmet 4400”
How much does a 4400 weigh?
A 4400 weighs 6,151 lb (2,790 kg) unladen.
| Unladen weight | 6,151 lb · 2,790 kgtwo-wheel-drive version |
|---|---|
| Wheelbase | 83.1 in · 2,112 mmtwo-wheel-drive version |
| Length | 149.2 in · 3,790 mm |
| Width | 80.0 in · 2,032 mm |
| Height | 94.1 in · 2,390 mm |
| Ground clearance | 19.9 in · 505 mmtwo-wheel-drive version |
| Front track | 55.5–63.4 in · 1,410–1,610 mmtwo-wheel-drive version |
| Rear track | 55.5–71.2 in · 1,409–1,809 mm |
| Turning radius, braked | 12.8 ft · 3.90 mtwo-wheel-drive version |
Source · Traktorenlexikon, “Valmet 4400”
Which tractors compare with a 4400?
Within 10% of its 55.0 hp at the PTO (claimed), the same type, and first built within 15 years of it.
- ZETOR 7211/724555.0 hp PTO, claimed · 1984–1993Side by side with the 4400 →
- ZETOR 7245 H55.0 hp PTO, claimed · 1984–1993Side by side with the 4400 →
- Massey Ferguson MF 365 (A)54.8 hp PTO, claimed · 1988–1997Side by side with the 4400 →
- David Brown 1494 (A)55.1 hp PTO, claimed · 1984–1988Side by side with the 4400 →
- J.I. Case 1494 (DT)55.1 hp PTO, claimed · 1984–1985Side by side with the 4400 →
- New Holland 483555 hp PTO, claimed · 1996–1998Side by side with the 4400 →
Everything else people ask
Is a 4400 two-wheel drive or four-wheel drive?
The VALMET 4400 was built in two-wheel drive (2WD) and four-wheel drive (4WD) versions, depending on configuration.
What PTO does a 4400 have?
A 4400 has a independent 540E/540 rpm rear PTO.
Where this page comes from
Compiled from Traktorenlexikon, “Valmet 465”; and Traktorenlexikon, “Valmet 4400”.
Sources
Facts taken from these documents, units converted. Numbers beside a figure refer to this list. Licences and attribution
- Traktorenlexikon: Valmet 4400 — CC BY-SA 4.0, WIKIBOOKS-TL-116448 · revision 998946. Wikibooks contributors (Traktorenlexikon). Original document
- Traktorenlexikon: Valmet 465 — CC BY-SA 4.0, WIKIBOOKS-TL-116427 · revision 998452. Wikibooks contributors (Traktorenlexikon). Original document