12 material differences

Tractor oneAgco GT-552004–2007No measured PTO figureTractor twoVALMET 44001993–1996No measured PTO figure

Which should you choose?

Read our verdict on the GT-55 and the 4400 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

12 material differences · 4 fields identical or within 5%, which is not counted as material

Agco GT-55 and VALMET 4400, field by field
Field	GT-55	4400	Gap
Engine
Engine power, claimed claimed	66.1 hp	66.1 hp	—
Engine declared	SAME-DEUTZ-FAHR 1000.3 WT 3-E	VALMET 320 DS	differs
Displacement declared	3.00 L	3.30 L	+10% 4400
Maximum torque declared	184 lb·ft · 250 N·m	177 lb·ft · 240 N·m	—
Transmission
Top speed declared	24.9 mph · 40 km/h	18.6 mph · 30 km/h	+33% GT-55
Clutch declared	—	Dry double clutch	—
Hydraulics & hitch
Hydraulic centre declared	Open centre	—	—
Pump flow declared	12.5 gpm · 47.3 L/min	10.3 gpm · 39.0 L/min	+21% GT-55
Pressure declared	3,118 psi · 215 bar	2,901 psi · 200 bar	+8% GT-55
Rear PTO speeds declared	540/1000 rpm	540E/540 rpm	differs
Weight & dimensions
Unladen weight declared	5,509 lb · 2,499 kg	6,151 lb · 2,790 kg	+12% 4400
Wheelbase declared	82.9 in · 2,105 mm	83.1 in · 2,112 mm	—
Length declared	146.5 in · 3,720 mm	149.2 in · 3,790 mm	—
Width declared	75.6–87.8 in · 1,920–2,230 mm	80.0 in · 2,032 mm	differs
Height, over the cab declared	104.6 in · 2,657 mm	94.1 in · 2,390 mm	+11% GT-55
Ground clearance declared	17.5 in · 445 mm	19.9 in · 505 mm	+13% 4400
Turning radius, braked declared	10.0 ft · 3.06 m	12.8 ft · 3.90 m	+27% 4400
Fuel tank declared	94.8 qt · 89.7 L	100.4 qt · 95.0 L	+6% 4400

Source

Source