12 material differences
Tractor oneRenault 70-14 V1986–1999No measured PTO figureTractor twoVALMET 44001993–1996No measured PTO figure
Which should you choose?
Read our verdict on the 70-14 V and the 4400 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
12 material differences · 3 fields identical or within 5%, which is not counted as material
| Field | 70-14 V | 4400 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 66.1 hp | 66.1 hp | — |
| Engine declared | KLÖCKNER-HUMBOLDT-DEUTZ F4L 912 | VALMET 320 DS | differs |
| Displacement declared | 3.77 L | 3.30 L | +14% 70-14 V |
| Maximum torque declared | 164 lb·ft · 223 N·m | 177 lb·ft · 240 N·m | +8% 4400 |
| Transmission | |||
| Top speed declared | 18.6 mph · 30 km/h | 18.6 mph · 30 km/h | — |
| Clutch declared | Dry OMG double clutch | Dry double clutch | differs |
| Hydraulics & hitch | |||
| Pump flow declared | 11.4 gpm · 43.3 L/min | 10.3 gpm · 39.0 L/min | +11% 70-14 V |
| Pressure declared | — | 2,901 psi · 200 bar | — |
| Three-point lift, at the coupling points declared | 7,893 lb · 3,580 kg | 6,294 lb · 2,855 kg | +25% 70-14 V |
| Rear PTO speeds declared | 540 rpm | 540E/540 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 4,586 lb · 2,080 kg | 6,151 lb · 2,790 kg | +34% 4400 |
| Wheelbase declared | 81.7 in · 2,075 mm | 83.1 in · 2,112 mm | — |
| Length declared | 137.7 in · 3,498 mm | 149.2 in · 3,790 mm | +8% 4400 |
| Width declared | 43.9–63.6 in · 1,115–1,615 mm | 80.0 in · 2,032 mm | differs |
| Ground clearance declared | 11.0 in · 280 mm | 19.9 in · 505 mm | +80% 4400 |
| Turning radius, braked declared | — | 12.8 ft · 3.90 m | — |
| Fuel tank declared | 65.5 qt · 62.0 L | 100.4 qt · 95.0 L | +53% 4400 |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Renault 70-14 V sources
Source
- Source: Traktorenlexikon, “Renault 70-14 V R3257”
VALMET 4400 sources
Source
- Source: Traktorenlexikon, “Valmet 4400”
- Source: Traktorenlexikon, “Valmet 465”