• Vehicle type: unspecified
  • Rigid chassis
  • WhichTractor size: Utility
  • No lab test on file
  • 1987–1992

It was ranked on an engine power figure whose source does not say gross or net. WhichTractor size, not the maker’s category

We looked and the record does not say what this machine is. How we decide what a machine is

John Deere 2355 (A) specs: hp, weight, years

John Deere 4.239 DL-007 or DL-010 four-cylinder diesel. The manufacturer claimed 66.1 horsepower. No laboratory has tested one, so there is no measured figure at the shaft.

Engine power, claimed · gross or net not stated

66.1 hp

49.3 kW as stated by the source

No lab test on file

Claimed · standard not stated by the source

Source · Traktorenlexikon, “John Deere 2355”, claimed

This is the maker’s own figure, measured at the engine. Power at the PTO is lower — by how much, for this machine, nobody has measured.

Weight
6,779 lb
Hyd. flow
14.7 gpm
Top speed
18.6 mph

John Deere 2355 (A) specs: key facts

  • The John Deere 2355 (A) was built from 1987 to 1992.

  • The John Deere 2355 (A) has a claimed engine power (gross or net not stated) of 49.3 kW (66.1 hp); it has no measured PTO figure.

  • The John Deere 2355 (A) was offered in two-wheel-drive and four-wheel-drive versions.

  • The John Deere 2355 (A) has a John Deere 4.239 DL-007 or DL-010 engine, a 4-cylinder 3.92 L diesel unit.

  • The John Deere 2355 (A) weighs 3,075 kg (6,779 lb) unladen.

  • The John Deere 2355 (A) has an independent rear PTO running at 540 rpm.

  • The hydraulic pump of the John Deere 2355 (A) delivers 55.5 L/min (14.7 gpm).

Source · Traktorenlexikon, “John Deere 2355”

How does the 2355 (A) compare with its class?

  • Strength:

    A hydraulic pump flow of 55.5 L/min is high for its class — 50% above the median of 37 L/min across the 289 machines within 10% of its power that hold this figure.

  • Limitation:

    Eight forward gears is low for its class — 33% below the median of 12 across the 340 machines within 10% of its power that hold this figure.

Derived by WhichTractor from 347 comparable records. How we work this out

Illustration of the 1987–1992 John Deere 2355 (A), a 66 hp farm tractor, four-wheel-drive version, a drawing generated from its specification record
Illustration — not a photograph · four-wheel-drive version

How much horsepower does a 2355 (A) have?

The only figure for the 2355 (A) is 66.1 hp (49.3 kW) of claimed engine power, gross or net not stated, no test standard stated — not power at the shaft.

Engine, claimed (gross/net not stated)
66.1 hp

Source · Traktorenlexikon, “John Deere 2355”

What engine is in a 2355 (A)?

A 2355 (A) has a John Deere 4.239 DL-007 or DL-010, a 4-cylinder 3.92 L diesel engine.

Engine — 2355 (A) engine specifications
Make & modelJohn Deere 4.239 DL-007 or DL-010
Cylinders4, liquid-cooled
Displacement239.2 ci · 3.92 L
Electrical system12 V

Source · Traktorenlexikon, “John Deere 2355”

How much will a 2355 (A) lift, and what is its hydraulic flow?

Hydraulic and PTO specifications for the 2355 (A) are below.

Hydraulics & PTO — 2355 (A) hydraulics and PTO specifications
SystemClosed centre
Pump flow14.7 gpm · 55.5 L/min
Rear PTOIndependent, engine-driven, 540 rpm @ 2,382 engine rpm

Source · Traktorenlexikon, “John Deere 2355”

What transmission does a 2355 (A) have?

Transmission specifications for the 2355 (A) are below.

Transmission — 2355 (A) transmission specifications
Top speed18.6 mph · 30 km/h

Source · Traktorenlexikon, “John Deere 2355”

How much does a 2355 (A) weigh?

A 2355 (A) weighs 6,779 lb (3,075 kg) unladen.

Weights & dimensions — 2355 (A) weights and dimensions
Unladen weight6,779 lb · 3,075 kgtwo-wheel-drive version
Wheelbase89.7 in · 2,279 mmtwo-wheel-drive version
Length145.0 in · 3,683 mmtwo-wheel-drive version
Width89.4 in · 2,270 mm
Height102.2 in · 2,595 mm
Ground clearance15.7 in · 400 mmtwo-wheel-drive version
Front track57.1–78.7 in · 1,450–2,000 mmtwo-wheel-drive version
Rear track59.8–96.1 in · 1,520–2,440 mm

Source · Traktorenlexikon, “John Deere 2355”

What oil does a 2355 (A) take, and how much?

A 2355 (A) engine takes 10.6 qt (10.0 L). Single source, not independently verified — always confirm against the operator’s manual for your machine.

2355 (A) fluid capacities, grades and service intervals
SystemCapacity
Engine oil10.6 qt · 10.0 LSource: Traktorenlexikon, “John Deere 2355” · single source, not independently verified
Transmission48.6 qt · 46.0 LSource: Traktorenlexikon, “John Deere 2355” · single source, not independently verified
Front axle5.6 qt · 5.3 LSource: Traktorenlexikon, “John Deere 2355” · single source, not independently verified
Cooling system13.7 qt · 13.0 LSource: Traktorenlexikon, “John Deere 2355” · single source, not independently verified

Always confirm against the operator’s manual for your machine before service.

Which tractors compare with a 2355 (A)?

Within 10% of its 66.1 hp of claimed engine power, the same type, and first built within 15 years of it.

Common questions about the John Deere 2355 (A)

Is a 2355 (A) two-wheel drive or four-wheel drive?

The John Deere 2355 (A) was offered in two-wheel-drive and four-wheel-drive versions.

What PTO does a 2355 (A) have?

A 2355 (A) has a independent 540 rpm rear PTO.

Sources and how this page was built

Compiled from Traktorenlexikon, “John Deere 2355”.

Sources checked

14 SEP 2026

Spotted an error?

Sources

Facts taken from these documents, units converted. Numbers beside a figure refer to this list. Licences and attribution

  1. Traktorenlexikon: John Deere 2355 — CC BY-SA 4.0, WIKIBOOKS-TL-106104 · revision 883585. Wikibooks contributors (Traktorenlexikon). Original document