4 material differences · fewer than 12
Tractor oneFord 4610 (A)1981–1991No measured PTO figureTractor twoVALMET 405 (405/4)1985–1989No measured PTO figure
Which should you choose?
Read our verdict on the 4610 (A) and the 405 (405/4) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
4 material differences · 8 fields identical or within 5%, which is not counted as material
| Field | 4610 (A) | 405 (405/4) | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 60.2 hp | 60.2 hp | — |
| Engine declared | — | VALMET TD-27 DS 4 | — |
| Displacement declared | — | 2.69 L | — |
| Maximum torque declared | 154 lb·ft · 209 N·m | 149 lb·ft · 202 N·m | — |
| Transmission | |||
| Top speed declared | 18.6 mph · 30 km/h | 18.6 mph · 30 km/h | — |
| Hydraulics & hitch | |||
| Pump flow declared | 8.4 gpm · 31.7 L/min | 9.7 gpm · 36.6 L/min | +15% 405 (405/4) |
| Rear PTO speeds declared | 540 rpm | 540 rpm | — |
| Weight & dimensions | |||
| Unladen weight declared | 6,151 lb · 2,790 kg | 5,975 lb · 2,710 kg | — |
| Wheelbase declared | 84.5 in · 2,146 mm | 83.1 in · 2,112 mm | — |
| Length declared | 138.6 in · 3,521 mm | 146.1 in · 3,710 mm | +5% 405 (405/4) |
| Width declared | 69.7–93.7 in · 1,770–2,380 mm | 76.3 in · 1,938 mm | differs |
| Height, over the exhaust declared | 106.7 in · 2,710 mm | 103.0 in · 2,615 mm | — |
| Ground clearance declared | 19.5 in · 495 mm | 19.9 in · 505 mm | — |
| Turning radius, braked declared | 11.5 ft · 3.49 m | — | — |
| Fuel tank declared | 63.9 qt · 60.5 L | 77.1 qt · 73.0 L | +21% 405 (405/4) |
Ford 4610 (A) sources
Source
- Source: Traktorenlexikon, “Ford 4610”
VALMET 405 (405/4) sources
Source
- Source: Traktorenlexikon, “Valmet 405”