- Rigid chassis
- WhichTractor size: Utility
- Not independently tested
- 1976–1983
WhichTractor size, not the maker’s category
Derived by WhichTractor from a sourced three-point linkage. How we decide what a machine is
Massey Ferguson MF 575 (A) Full specifications
Perkins A 4.236 four-cylinder diesel. The manufacturer claimed 65.2 horsepower. No laboratory has tested one, so there is no measured figure at the shaft.
Engine power, claimed · gross or net not stated
65.2 hp
48.6 kW as stated by the source
Not independently tested
Claimed · standard not stated by the source
Source · Traktorenlexikon, “Massey Ferguson MF 575 & 575A”, claimed
- Weight
- 6,923 lb
- 3-point lift
- 4,630 lb
- Hyd. flow
- 16.5 gpm
- Top speed
- 15.5 mph
Massey Ferguson MF 575 (A) specs: key facts
The Massey Ferguson MF 575 (A) was built from 1976 to 1983.
The Massey Ferguson MF 575 (A) has a claimed engine power (gross or net not stated) of 48.6 kW (65.2 hp); it has no measured PTO figure.
The Massey Ferguson MF 575 (A) was built in two-wheel drive (2WD) and four-wheel drive (4WD) versions, depending on configuration.
The Massey Ferguson MF 575 (A) has a Perkins A 4.236 engine, a 4-cylinder 3.87 L diesel unit.Source 1
The Massey Ferguson MF 575 (A) weighs 3,140 kg (6,923 lb) unladen.
The Massey Ferguson MF 575 (A) has an independent rear PTO running at 540/1686 rpm.
The three-point hitch of the Massey Ferguson MF 575 (A) lifts 2,100 kg (4,630 lb) at the lower-link ends.
The hydraulic pump of the Massey Ferguson MF 575 (A) delivers 62.5 L/min (16.5 gpm).
Source · Traktorenlexikon, “Massey Ferguson MF 575 & 575A”
How much horsepower does an MF 575 (A) have?
The only figure for the MF 575 (A) is 65.2 hp (48.6 kW) of claimed engine power, gross or net not stated, no test standard stated — not power at the shaft.
Source · Traktorenlexikon, “Massey Ferguson MF 575 & 575A”
What engine is in an MF 575 (A)?
An MF 575 (A) has a Perkins A 4.236, a 4-cylinder 3.87 L diesel engine.
| Make & model | Perkins A 4.236Source 1 |
|---|---|
| Cylinders | 4, liquid-cooledSource 1 |
| Displacement | 236.0 ci · 3.87 LSource 1 |
| Max torque | 198 lb·ft · 268.2 N·m @ 1,280 rpm |
| Injection | direct injection |
| Electrical system | 12 V |
Source · Traktorenlexikon, “Massey Ferguson MF 575 & 575A”
How much will an MF 575 (A) lift, and what is its hydraulic flow?
An MF 575 (A) lifts 4,630 lb (2,100 kg) at the lower-link ends.
| Pump flow | 16.5 gpm · 62.5 L/min |
|---|---|
| Lift at ends | 4,630 lb · 2,100 kg |
| Rear PTO | Independent, engine-driven, 540/1686 rpm @ 1,686 engine rpmEngages under load |
Source · Traktorenlexikon, “Massey Ferguson MF 575 & 575A”
What transmission does an MF 575 (A) have?
Transmission specifications for the MF 575 (A) are below.
| Clutch | Pedal-operated, dry and air-cooled single-plate clutch |
|---|---|
| Brakes | Hydraulically operated, wet Girling multi-disc brake |
| Steering | Hydrostatic Danfoss steering with integrated oil circuit |
| Top speed | 15.5 mph · 25 km/h |
Source · Traktorenlexikon, “Massey Ferguson MF 575 & 575A”
How much does an MF 575 (A) weigh?
An MF 575 (A) weighs 6,923 lb (3,140 kg) unladen.
| Unladen weight | 6,923 lb · 3,140 kgtwo-wheel-drive version |
|---|---|
| Wheelbase | 87.5 in · 2,222 mmtwo-wheel-drive version |
| Length | 149.2 in · 3,790 mmtwo-wheel-drive version |
| Width | 74.0 in · 1,880 mmtwo-wheel-drive version |
| Height | 98.8 in · 2,510 mmtwo-wheel-drive version |
| Ground clearance | 15.4 in · 390 mm |
| Front track | 54.0–70.1 in · 1,372–1,780 mm |
| Rear track | 56.0–84.1 in · 1,422–2,136 mm |
| Turning radius, braked | 12.3 ft · 3.74 m |
Source · Traktorenlexikon, “Massey Ferguson MF 575 & 575A”
Which tractors compare with an MF 575 (A)?
Within 10% of its 54.2 hp at the PTO (claimed), the same type, and first built within 15 years of it.
- Eicher Mammut 335454 hp PTO, claimed · 1974–1978Side by side with the MF 575 (A) →
- ZETOR 671154.3 hp PTO, claimed · 1972–1977Side by side with the MF 575 (A) →
- VALMET 60254.1 hp PTO, claimed · 1978–1982Side by side with the MF 575 (A) →
- OLIVER 1450 (4 WD)54.0 hp PTO, claimed · 1967–1969Side by side with the MF 575 (A) →
- Deutz-Fahr AgroXtra 3.5754.0 hp PTO, claimed · 1991–1996Side by side with the MF 575 (A) →
- Leyland 38454.0 hp PTO, claimed · 1969–1972Side by side with the MF 575 (A) →
Everything else people ask
Is an MF 575 (A) two-wheel drive or four-wheel drive?
The Massey Ferguson MF 575 (A) was built in two-wheel drive (2WD) and four-wheel drive (4WD) versions, depending on configuration.
What PTO does an MF 575 (A) have?
An MF 575 (A) has a independent 540/1686 rpm rear PTO.
Where this page comes from
Compiled from Traktorenlexikon, “Massey Ferguson MF 168 & MF 168A”; and Traktorenlexikon, “Massey Ferguson MF 575 & 575A”.
Sources
Facts taken from these documents, units converted. Numbers beside a figure refer to this list. Licences and attribution
- Traktorenlexikon: Massey Ferguson MF 168 & MF 168A — CC BY-SA 4.0, WIKIBOOKS-TL-69277 · revision 1065377. Wikibooks contributors (Traktorenlexikon). Original document
- Traktorenlexikon: Massey Ferguson MF 575 & 575A — CC BY-SA 4.0, WIKIBOOKS-TL-79555 · revision 957154. Wikibooks contributors (Traktorenlexikon). Original document