WhichTractor
  • Rigid chassis
  • WhichTractor size: Utility
  • No lab test on file
  • 1972–1980

WhichTractor size, not the maker’s category

Derived by WhichTractor from a sourced three-point linkage. How we decide what a machine is

VALMET 702 (A) specs: hp, weight, years

VALMET 411 B or C four-cylinder diesel. The manufacturer claimed 70.0 horsepower. No laboratory has tested one, so there is no measured figure at the shaft.

Engine power, claimed · gross or net not stated

70.0 hp

52.2 kW as stated by the source

No lab test on file

Claimed · standard not stated by the source

Source · Traktorenlexikon, “Valmet 702”, claimed

This is the maker’s own figure, measured at the engine. Power at the PTO is lower — by how much, for this machine, nobody has measured.

Weight
7,419–7,606 lb
3-point lift
4,740 lb
Hyd. flow
6.9 gpm
Top speed
18.6 mph

VALMET 702 (A) specs: key facts

  • The VALMET 702 (A) was built from 1972 to 1980.

  • The VALMET 702 (A) has a claimed engine power (gross or net not stated) of 52.2 kW (70.0 hp); it has no measured PTO figure.

  • The VALMET 702 (A) was offered in two-wheel-drive and four-wheel-drive versions.

  • The VALMET 702 (A) has a VALMET 411 B or C engine, a 4-cylinder 4.18 L diesel unit.

  • The VALMET 702 (A) weighs 3,365–3,450 kg (7,419–7,606 lb) unladen.

  • The VALMET 702 (A) has an independent rear PTO running at 540 rpm / 1000 rpm.

  • The three-point hitch of the VALMET 702 (A) lifts 2,150 kg (4,740 lb) at the lower-link ends.

  • The hydraulic pump of the VALMET 702 (A) delivers 26.0 L/min (6.9 gpm).

Source · Traktorenlexikon, “Valmet 702”

How does the 702 (A) compare with its class?

  • Limitation:

    A hydraulic pump flow of 26 L/min is low for its class — 35% below the median of 40 L/min across the 342 machines within 10% of its power that hold this figure.

  • Limitation:

    Eight forward gears is low for its class — 33% below the median of 12 across the 406 machines within 10% of its power that hold this figure.

Derived by WhichTractor from 415 comparable records. How we work this out

Illustration of the 1972–1980 VALMET 702 (A), a 70 hp farm tractor, four-wheel-drive version, a drawing generated from its specification record
Illustration — not a photograph · four-wheel-drive version

How much horsepower does a 702 (A) have?

The only figure for the 702 (A) is 70.0 hp (52.2 kW) of claimed engine power, gross or net not stated, no test standard stated — not power at the shaft.

Engine, claimed (gross/net not stated)
70.0 hp

Source · Traktorenlexikon, “Valmet 702”

What engine is in a 702 (A)?

A 702 (A) has a VALMET 411 B or C, a 4-cylinder 4.18 L diesel engine.

Engine — 702 (A) engine specifications
Make & modelVALMET 411 B or C
Cylinders4, liquid-cooled
Displacement254.9 ci · 4.18 L
Electrical system12 V

Source · Traktorenlexikon, “Valmet 702”

How much will a 702 (A) lift, and what is its hydraulic flow?

A 702 (A) lifts 4,740 lb (2,150 kg) at the lower-link ends of its Category 2 three-point hitch.

Hydraulics & PTO — 702 (A) hydraulics and PTO specifications
Pump flow6.9 gpm · 26.0 L/min
Hitch categoryCategory 2
Lift at ends4,740 lb · 2,150 kg
Rear PTOIndependent, engine-driven, 540 rpm / 1000 rpm @ 1,556 engine rpm
PTO shaft1 3/8"- 6 splines Form-A

Source · Traktorenlexikon, “Valmet 702”

What transmission does a 702 (A) have?

Transmission specifications for the 702 (A) are below.

Transmission — 702 (A) transmission specifications
SteeringHydrostatic Danfoss steering, type ORBITROL
Top speed18.6 mph · 30 km/h

Source · Traktorenlexikon, “Valmet 702”

How much does a 702 (A) weigh?

A 702 (A) weighs 7,419–7,606 lb (3,365–3,450 kg) unladen.

Weights & dimensions — 702 (A) weights and dimensions
Unladen weight7,419–7,606 lb · 3,365–3,450 kgtwo-wheel-drive version
Wheelbase88.2 in · 2,240 mmtwo-wheel-drive version
Length150.4 in · 3,820 mmtwo-wheel-drive version
Width73.6 in · 1,869 mmtwo-wheel-drive version
Height101.8 in · 2,585 mmtwo-wheel-drive version
Ground clearance18.1 in · 460 mmtwo-wheel-drive version
Front track54.2–62.0 in · 1,376–1,576 mmtwo-wheel-drive version
Rear track56.5–77.3 in · 1,436–1,964 mmtwo-wheel-drive version
Turning radius, braked11.8 ft · 3.61 mtwo-wheel-drive version

Source · Traktorenlexikon, “Valmet 702”

What oil does a 702 (A) take, and how much?

A 702 (A) engine takes 13.7 qt (13.0 L). Single source, not independently verified — always confirm against the operator’s manual for your machine.

702 (A) fluid capacities, grades and service intervals
SystemCapacity
Engine oil13.7 qt · 13.0 LSource: Traktorenlexikon, “Valmet 702” · single source, not independently verified
Transmission22.2 qt · 21.0 LSource: Traktorenlexikon, “Valmet 702” · single source, not independently verified
Hydraulic24.3 qt · 23.0 LSource: Traktorenlexikon, “Valmet 702” · single source, not independently verified
Front axle5.3 qt · 5.0 LSource: Traktorenlexikon, “Valmet 702” · single source, not independently verified
Cooling system15.9 qt · 15.0 LSource: Traktorenlexikon, “Valmet 702” · single source, not independently verified

Always confirm against the operator’s manual for your machine before service.

Which tractors compare with a 702 (A)?

Within 10% of its 54.7 hp at the PTO as the maker claimed it, with no laboratory test on file, the same type, and first built within 15 years of it.

Common questions about the VALMET 702 (A)

Is a 702 (A) two-wheel drive or four-wheel drive?

The VALMET 702 (A) was offered in two-wheel-drive and four-wheel-drive versions.

What PTO does a 702 (A) have?

A 702 (A) has a independent 540 rpm / 1000 rpm rear PTO on a 1 3/8"- 6 splines Form-A shaft.

Sources and how this page was built

Compiled from Traktorenlexikon, “Valmet 702”.

Sources checked

14 SEP 2026

Spotted an error?

Sources

Facts taken from these documents, units converted. Numbers beside a figure refer to this list. Licences and attribution

  1. Traktorenlexikon: Valmet 702 — CC BY-SA 4.0, WIKIBOOKS-TL-116330 · revision 997201. Wikibooks contributors (Traktorenlexikon). Original document