- Rigid chassis
- WhichTractor size: Compact
- Not independently tested
- 1987–1994
WhichTractor size, not the maker’s category
Derived by WhichTractor from a sourced three-point linkage. How we decide what a machine is
Massey Ferguson MF 360 (A) Full specifications
Perkins AT 3.152-4 three-cylinder diesel. The manufacturer claimed 57.3 horsepower. No laboratory has tested one, so there is no measured figure at the shaft.
Engine power, claimed · gross or net not stated
57.3 hp
42.7 kW as stated by the source
Not independently tested
Claimed · standard not stated by the source
Source · Traktorenlexikon, “Massey Ferguson MF 360”, claimed
- Weight
- 5,124 lb
- 3-point lift
- 4,255 lb
- Hyd. flow
- 5.0 gpm
- Top speed
- 18.6 mph
Massey Ferguson MF 360 (A) specs: key facts
The Massey Ferguson MF 360 (A) was built from 1987 to 1994.
The Massey Ferguson MF 360 (A) has a claimed engine power (gross or net not stated) of 42.7 kW (57.3 hp); it has no measured PTO figure.
The Massey Ferguson MF 360 (A) was built in two-wheel drive (2WD) and four-wheel drive (4WD) versions, depending on configuration.
The Massey Ferguson MF 360 (A) has a Perkins AT 3.152-4 engine, a 3-cylinder 2.50 L diesel unit.Source 1
The Massey Ferguson MF 360 (A) weighs 2,324 kg (5,124 lb) unladen.
The Massey Ferguson MF 360 (A) has an independent rear PTO running at 540 rpm.
The three-point hitch of the Massey Ferguson MF 360 (A) lifts 1,930 kg (4,255 lb) at the lower-link ends.
The hydraulic pump of the Massey Ferguson MF 360 (A) delivers 18.9 L/min (5.0 gpm).
Source · Traktorenlexikon, “Massey Ferguson MF 360”
How much horsepower does an MF 360 (A) have?
The only figure for the MF 360 (A) is 57.3 hp (42.7 kW) of claimed engine power, gross or net not stated, no test standard stated — not power at the shaft.
Source · Traktorenlexikon, “Massey Ferguson MF 360”
What engine is in an MF 360 (A)?
An MF 360 (A) has a Perkins AT 3.152-4, a 3-cylinder 2.50 L diesel engine.
| Make & model | Perkins AT 3.152-4 |
|---|---|
| Cylinders | 3, liquid-cooledSource 2 |
| Displacement | 152.7 ci · 2.50 L |
| Max torque | 134 lb·ft · 182 N·m @ 1,460 rpmSource 2 |
| Electrical system | 12 VSource 2 |
Source · Traktorenlexikon, “Massey Ferguson MF 253”
How much will an MF 360 (A) lift, and what is its hydraulic flow?
An MF 360 (A) lifts 4,255 lb (1,930 kg) at the lower-link ends.
| Pump flow | 5.0 gpm · 18.9 L/min |
|---|---|
| Lift at ends | 4,255 lb · 1,930 kg |
| Rear PTO | Independent, engine-driven, 540 rpm @ 1,789 engine rpm |
| PTO shaft | 1 3/8"- 6 splines |
Source · Traktorenlexikon, “Massey Ferguson MF 360”
What transmission does an MF 360 (A) have?
Transmission specifications for the MF 360 (A) are below.
| Steering | Hydrostatic Danfoss steering type OSPC-ON |
|---|---|
| Top speed | 18.6 mph · 30 km/h |
Source · Traktorenlexikon, “Massey Ferguson MF 360”
How much does an MF 360 (A) weigh?
An MF 360 (A) weighs 5,124 lb (2,324 kg) unladen.
| Unladen weight | 5,124 lb · 2,324 kgtwo-wheel-drive version |
|---|---|
| Wheelbase | 76.1 in · 1,933 mmtwo-wheel-drive version |
| Length | 129.1 in · 3,280 mmtwo-wheel-drive version |
| Width | 69.3 in · 1,760 mm |
| Height | 92.9 in · 2,360 mm |
| Ground clearance | 8.9 in · 227 mmtwo-wheel-drive version |
| Front track | 48.3–72.3 in · 1,227–1,837 mmtwo-wheel-drive version |
| Rear track | 55.1–83.1 in · 1,400–2,112 mm |
Source · Traktorenlexikon, “Massey Ferguson MF 360”
Which tractors compare with an MF 360 (A)?
Within 10% of its 44.8 hp at the PTO (claimed), the same type, and first built within 15 years of it.
- Fiat 55-66 (DT)44.8 hp PTO, claimed · 1985–1992Side by side with the MF 360 (A) →
- Fiat 55-66 V/F (DT-V/F)44.8 hp PTO, claimed · 1985–1992Side by side with the MF 360 (A) →
- Hürlimann H-356 (A)44.8 hp PTO, claimed · 1983–1986Side by side with the MF 360 (A) →
- Fiat 540 (DT)44.7 hp PTO, claimed · 1973–1982Side by side with the MF 360 (A) →
- Fiat 540 Spezial (DT)44.7 hp PTO, claimed · 1973–1980Side by side with the MF 360 (A) →
- Fiat 540 V/E44.7 hp PTO, claimed · 1973–1982Side by side with the MF 360 (A) →
Everything else people ask
Is an MF 360 (A) two-wheel drive or four-wheel drive?
The Massey Ferguson MF 360 (A) was built in two-wheel drive (2WD) and four-wheel drive (4WD) versions, depending on configuration.
What PTO does an MF 360 (A) have?
An MF 360 (A) has a independent 540 rpm rear PTO on a 1 3/8"- 6 splines shaft.
Where this page comes from
Compiled from Traktorenlexikon, “Massey Ferguson MF 253”; and Traktorenlexikon, “Massey Ferguson MF 360”.
Sources
Facts taken from these documents, units converted. Numbers beside a figure refer to this list. Licences and attribution
- Traktorenlexikon: Massey Ferguson MF 253 — CC BY-SA 4.0, WIKIBOOKS-TL-86837 · revision 992126. Wikibooks contributors (Traktorenlexikon). Original document
- Traktorenlexikon: Massey Ferguson MF 360 — CC BY-SA 4.0, WIKIBOOKS-TL-86877 · revision 992158. Wikibooks contributors (Traktorenlexikon). Original document