8 material differences · fewer than 12
Tractor oneLandini 6060 (DT) TL-39 N/K (TL-39 DT/K)1993–2000No measured PTO figureTractor twoMassey Ferguson MF 360 (A)1987–1994No measured PTO figure
Which should you choose?
Read our verdict on the 6060 (DT) TL-39 N/K (TL-39 DT/K) and the MF 360 (A) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
8 material differences · 5 fields identical or within 5%, which is not counted as material
| Field | 6060 (DT) TL-39 N/K (TL-39 DT/K) | MF 360 (A) | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 57.3 hp | 57.3 hp | — |
| Engine declared | Perkins AT 3.152-4 | Perkins AT 3.152-4 | — |
| Displacement declared | 2.50 L | 2.50 L | — |
| Maximum torque declared | 155 lb·ft · 210 N·m | 134 lb·ft · 182 N·m | +15% 6060 (DT) TL-39 N/K (TL-39 DT/K) |
| Transmission | |||
| Top speed declared | 18.6 mph · 30 km/h | 18.6 mph · 30 km/h | — |
| Hydraulics & hitch | |||
| Pump flow declared | 9.9 gpm · 37.6 L/min | 5.0 gpm · 18.9 L/min | +99% 6060 (DT) TL-39 N/K (TL-39 DT/K) |
| Pressure declared | 2,756 psi · 190 bar | — | — |
| Rear PTO speeds declared | 540/1000 rpm | 540 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 5,291 lb · 2,400 kg | 5,124 lb · 2,324 kg | — |
| Wheelbase declared | 83.7 in · 2,126 mm | 76.1 in · 1,933 mm | +10% 6060 (DT) TL-39 N/K (TL-39 DT/K) |
| Length declared | 139.4 in · 3,540 mm | 129.1 in · 3,280 mm | +8% 6060 (DT) TL-39 N/K (TL-39 DT/K) |
| Width declared | 75.8 in · 1,925 mm | 69.3 in · 1,760 mm | +9% 6060 (DT) TL-39 N/K (TL-39 DT/K) |
| Ground clearance declared | 19.3 in · 490 mm | 8.9 in · 227 mm | +116% 6060 (DT) TL-39 N/K (TL-39 DT/K) |
| Turning radius, braked declared | 11.7 ft · 3.57 m | — | — |
| Fuel tank declared | 90.9 qt · 86.0 L | 71.9 qt · 68 L | +26% 6060 (DT) TL-39 N/K (TL-39 DT/K) |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Landini 6060 (DT) TL-39 N/K (TL-39 DT/K) sources
- Source: Traktorenlexikon, “Landini 6060”
- Source: Traktorenlexikon, “Massey Ferguson MF 253”
Massey Ferguson MF 360 (A) sources
- Source: Traktorenlexikon, “Massey Ferguson MF 360”
- Source: Traktorenlexikon, “Massey Ferguson MF 253”