9 material differences · fewer than 12
Tractor oneAGRIFULL 80-56 (DT)1980–1986No measured PTO figureTractor twoMassey Ferguson MF 360 (A)1987–1994No measured PTO figure
Which should you choose?
Read our verdict on the 80-56 (DT) and the MF 360 (A) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
9 material differences · 4 fields identical or within 5%, which is not counted as material
| Field | 80-56 (DT) | MF 360 (A) | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 57.3 hp | 57.3 hp | — |
| Engine declared | MWM D-227-3 | Perkins AT 3.152-4 | differs |
| Displacement declared | 2.83 L | 2.50 L | +13% 80-56 (DT) |
| Maximum torque declared | 127 lb·ft · 172 N·m | 134 lb·ft · 182 N·m | +6% MF 360 (A) |
| Transmission | |||
| Top speed declared | 15.5 mph · 25 km/h | 18.6 mph · 30 km/h | +20% MF 360 (A) |
| Hydraulics & hitch | |||
| Pump flow declared | 5.8 gpm · 22.0 L/min | 5.0 gpm · 18.9 L/min | +16% 80-56 (DT) |
| Rear PTO speeds declared | 540 rpm | 540 rpm | — |
| Weight & dimensions | |||
| Unladen weight declared | 5,071 lb · 2,300 kg | 5,124 lb · 2,324 kg | — |
| Wheelbase declared | 85.6 in · 2,175 mm | 76.1 in · 1,933 mm | +13% 80-56 (DT) |
| Length declared | 129.8 in · 3,298 mm | 129.1 in · 3,280 mm | — |
| Width declared | 76.0 in · 1,930 mm | 69.3 in · 1,760 mm | +10% 80-56 (DT) |
| Ground clearance declared | 19.5 in · 495 mm | 8.9 in · 227 mm | +118% 80-56 (DT) |
| Turning radius, braked declared | 12.5 ft · 3.80 m | — | — |
| Fuel tank declared | 84.5 qt · 80.0 L | 71.9 qt · 68 L | +18% 80-56 (DT) |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
AGRIFULL 80-56 (DT) sources
- Source: Traktorenlexikon, “Agrifull 80-56”
Massey Ferguson MF 360 (A) sources
- Source: Traktorenlexikon, “Massey Ferguson MF 360”
- Source: Traktorenlexikon, “Massey Ferguson MF 253”