- Rigid chassis
- WhichTractor size: Utility
- Not independently tested
- 1993–2000
It was ranked on an engine power figure whose source does not say gross or net. WhichTractor size, not the maker’s category
Derived by WhichTractor from a sourced three-point linkage. How we decide what a machine is
Landini 6060 (DT) TL-39 N/K (TL-39 DT/K) Full specifications
Perkins AT 3.152-4 three-cylinder diesel. The manufacturer claimed 57.3 horsepower. No laboratory has tested one, so there is no measured figure at the shaft.
Engine power, claimed · gross or net not stated
57.3 hp
42.7 kW as stated by the source
Not independently tested
Claimed · standard not stated by the source
Source · Traktorenlexikon, “Landini 6060”, claimed
- Weight
- 5,291 lb
- 3-point lift
- 4,427 lb
- Hyd. flow
- 9.9 gpm
- Top speed
- 18.6 mph
Landini 6060 (DT) TL-39 N/K (TL-39 DT/K) specs: key facts
The Landini 6060 (DT) TL-39 N/K (TL-39 DT/K) was built from 1993 to 2000.
The Landini 6060 (DT) TL-39 N/K (TL-39 DT/K) has a claimed engine power (gross or net not stated) of 42.7 kW (57.3 hp); it has no measured PTO figure.
The Landini 6060 (DT) TL-39 N/K (TL-39 DT/K) was offered in two-wheel-drive and four-wheel-drive versions.
The Landini 6060 (DT) TL-39 N/K (TL-39 DT/K) has a Perkins AT 3.152-4 engine, a 3-cylinder 2.50 L diesel unit.Source 2
The Landini 6060 (DT) TL-39 N/K (TL-39 DT/K) weighs 2,400 kg (5,291 lb) unladen.
The Landini 6060 (DT) TL-39 N/K (TL-39 DT/K) has an independent rear PTO running at 540/1000 rpm.
The three-point hitch of the Landini 6060 (DT) TL-39 N/K (TL-39 DT/K) lifts 2,008 kg (4,427 lb) at the lower-link ends.
The hydraulic pump of the Landini 6060 (DT) TL-39 N/K (TL-39 DT/K) delivers 37.6 L/min (9.9 gpm).
Source · Traktorenlexikon, “Landini 6060”
How much horsepower does a 6060 (DT) TL-39 N/K (TL-39 DT/K) have?
The only figure for the 6060 (DT) TL-39 N/K (TL-39 DT/K) is 57.3 hp (42.7 kW) of claimed engine power, gross or net not stated, no test standard stated — not power at the shaft.
Source · Traktorenlexikon, “Landini 6060”
What engine is in a 6060 (DT) TL-39 N/K (TL-39 DT/K)?
A 6060 (DT) TL-39 N/K (TL-39 DT/K) has a Perkins AT 3.152-4, a 3-cylinder 2.50 L diesel engine.
| Make & model | Perkins AT 3.152-4Source 2 |
|---|---|
| Cylinders | 3, liquid-cooledSource 2 |
| Displacement | 152.7 ci · 2.50 LSource 2 |
| Max torque | 155 lb·ft · 210 N·m @ 1,451 rpm |
| Electrical system | 12 V |
Source · Traktorenlexikon, “Landini 6060”
How much will a 6060 (DT) TL-39 N/K (TL-39 DT/K) lift, and what is its hydraulic flow?
A 6060 (DT) TL-39 N/K (TL-39 DT/K) lifts 4,427 lb (2,008 kg) at the lower-link ends.
| Pump flow | 9.9 gpm · 37.6 L/min |
|---|---|
| Pressure | 2,756 psi · 190 bar |
| Lift at ends | 4,427 lb · 2,008 kg |
| Rear PTO | Independent, engine-driven, 540/1000 rpm @ 1,944 engine rpmGround-speed PTO available |
Source · Traktorenlexikon, “Landini 6060”
What transmission does a 6060 (DT) TL-39 N/K (TL-39 DT/K) have?
Transmission specifications for the 6060 (DT) TL-39 N/K (TL-39 DT/K) are below.
| Brakes | Pedal-actuated hydraulic wet disc brake operating on differential side shafts |
|---|---|
| Steering | Hydrostatic Danfoss steering with separate oil circuit |
| Top speed | 18.6 mph · 30 km/h |
Source · Traktorenlexikon, “Landini 6060”
How much does a 6060 (DT) TL-39 N/K (TL-39 DT/K) weigh?
A 6060 (DT) TL-39 N/K (TL-39 DT/K) weighs 5,291 lb (2,400 kg) unladen.
| Unladen weight | 5,291 lb · 2,400 kgDT: 2,645 |
|---|---|
| Wheelbase | 83.7 in · 2,126 mmDT: 2,060 |
| Length | 139.4 in · 3,540 mmDT: 3,624 |
| Width | 75.8 in · 1,925 mm |
| Height | 93.3 in · 2,370 mm |
| Ground clearance | 19.3 in · 490 mmDT: 420 |
| Front track | 55.9–75.6 in · 1,420–1,920 mmDT: 1,413-1,793 |
| Rear track | 51.2–78.7 in · 1,300–2,000 mm |
| Turning radius, braked | 11.7 ft · 3.57 mDT: 3,950 |
Source · Traktorenlexikon, “Landini 6060”
Which tractors compare with a 6060 (DT) TL-39 N/K (TL-39 DT/K)?
Within 10% of its 57.3 hp of claimed engine power, the same type, and first built within 15 years of it.
- AGCO-ALLIS 566057.3 hp engine, claimed · 1994–1999Side by side with the 6060 (DT) TL-39 N/K (TL-39 DT/K) →
- Case-IH CS-58 (A)57.3 hp engine, claimed · 1996–2001Side by side with the 6060 (DT) TL-39 N/K (TL-39 DT/K) →
- DEUTZ-ALLIS 626057.3 hp engine, claimed · 1986–1990Side by side with the 6060 (DT) TL-39 N/K (TL-39 DT/K) →
- AGRIFULL 80-56 (DT)57.3 hp engine, claimed · 1980–1986Side by side with the 6060 (DT) TL-39 N/K (TL-39 DT/K) →
- Steyr 8070 (a)57.3 hp engine, claimed · 1979–1992Side by side with the 6060 (DT) TL-39 N/K (TL-39 DT/K) →
- SOMECA 570 V/E57.3 hp engine, claimed · 1978–1982Side by side with the 6060 (DT) TL-39 N/K (TL-39 DT/K) →
Everything else people ask
Is a 6060 (DT) TL-39 N/K (TL-39 DT/K) two-wheel drive or four-wheel drive?
The Landini 6060 (DT) TL-39 N/K (TL-39 DT/K) was offered in two-wheel-drive and four-wheel-drive versions.
What PTO does a 6060 (DT) TL-39 N/K (TL-39 DT/K) have?
A 6060 (DT) TL-39 N/K (TL-39 DT/K) has a independent 540/1000 rpm rear PTO.
Where this page comes from
Compiled from Traktorenlexikon, “Landini 6060”; and Traktorenlexikon, “Massey Ferguson MF 253”.
Sources
Facts taken from these documents, units converted. Numbers beside a figure refer to this list. Licences and attribution
- Traktorenlexikon: Landini 6060 — CC BY-SA 4.0, WIKIBOOKS-TL-113001 · revision 1067414. Wikibooks contributors (Traktorenlexikon). Original document
- Traktorenlexikon: Massey Ferguson MF 253 — CC BY-SA 4.0, WIKIBOOKS-TL-86837 · revision 992126. Wikibooks contributors (Traktorenlexikon). Original document