9 material differences · fewer than 12
Tractor oneFiat 566 (DT)1982–1986No measured PTO figureTractor twoMassey Ferguson MF 360 (A)1987–1994No measured PTO figure
Which should you choose?
Read our verdict on the 566 (DT) and the MF 360 (A) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
9 material differences · 4 fields identical or within 5%, which is not counted as material
| Field | 566 (DT) | MF 360 (A) | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 57.3 hp | 57.3 hp | — |
| Engine declared | FIAT-IVECO 8035.04.376 | Perkins AT 3.152-4 | differs |
| Displacement declared | 2.75 L | 2.50 L | +10% 566 (DT) |
| Maximum torque declared | 148 lb·ft · 200 N·m | 134 lb·ft · 182 N·m | +10% 566 (DT) |
| Transmission | |||
| Top speed declared | 15.5–18.6 mph · 25–30 km/h | 18.6 mph · 30 km/h | differs |
| Hydraulics & hitch | |||
| Pump flow declared | — | 5.0 gpm · 18.9 L/min | — |
| Pressure declared | 3,336–3,481 psi · 230–240 bar | — | — |
| Three-point lift, at the coupling points declared | 5,732 lb · 2,600 kg | 4,255 lb · 1,930 kg | +35% 566 (DT) |
| Rear PTO speeds declared | 540 rpm | 540 rpm | — |
| Weight & dimensions | |||
| Unladen weight declared | 5,247 lb · 2,380 kg | 5,124 lb · 2,324 kg | — |
| Wheelbase declared | 85.6 in · 2,175 mm | 76.1 in · 1,933 mm | +13% 566 (DT) |
| Length declared | 127.9 in · 3,249 mm | 129.1 in · 3,280 mm | — |
| Width declared | 75.6 in · 1,920 mm | 69.3 in · 1,760 mm | +9% 566 (DT) |
| Ground clearance declared | 20.7 in · 525 mm | 8.9 in · 227 mm | +131% 566 (DT) |
| Turning radius, braked declared | 11.8 ft · 3.60 m | — | — |
| Fuel tank declared | 77.1 qt · 73.0 L | 71.9 qt · 68 L | +7% 566 (DT) |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Fiat 566 (DT) sources
- Source: Traktorenlexikon, “Fiat 566/566 DT”
Massey Ferguson MF 360 (A) sources
- Source: Traktorenlexikon, “Massey Ferguson MF 360”
- Source: Traktorenlexikon, “Massey Ferguson MF 253”