6 material differences · fewer than 12

Tractor oneLandini 11800 (DT)1987–2000No measured PTO figureTractor twoMassey Ferguson MF 3095 (A)1990–1995No measured PTO figure

Which should you choose?

Read our verdict on the 11800 (DT) and the MF 3095 (A) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

6 material differences · 10 fields identical or within 5%, which is not counted as material

Landini 11800 (DT) and Massey Ferguson MF 3095 (A), field by field
Field	11800 (DT)	MF 3095 (A)	Gap
Engine
Engine power, claimed claimed	105.7 hp	105.5 hp	—
Engine declared	PERKINS TW 6.354-4	Perkins 1006-6 HR3	differs
Displacement declared	5.80 L	5.99 L	—
Maximum torque declared	258 lb·ft · 350 N·m	300 lb·ft · 407 N·m	+16% MF 3095 (A)
Transmission
Top speed declared	18.6–24.9 mph · 30–40 km/h	18.6–24.9 mph · 30–40 km/h	—
Clutch declared	Pedal-operated dry single-plate clutch	Pedal-operated, dry and air-cooled VALEO single-plate clutch	differs
Hydraulics & hitch
Hydraulic centre declared	—	Open centre	—
Pump flow declared	13.5 gpm · 51.2 L/min	—	—
Three-point lift, at the coupling points declared	9,914 lb · 4,497 kg	9,215 lb · 4,180 kg	+8% 11800 (DT)
Rear PTO speeds declared	540/1000 rpm	540/1000 rpm	—
Weight & dimensions
Unladen weight declared	9,678 lb · 4,390 kg	9,645 lb · 4,375 kg	—
Maximum permissible mass declared	15,432 lb · 7,000 kg	15,432 lb · 7,000 kg	—
Wheelbase declared	106.1 in · 2,696 mm	106.1 in · 2,696 mm	—
Length declared	175.2 in · 4,450 mm	170.2 in · 4,323 mm	—
Width declared	83.9 in · 2,130 mm	74.8 in · 1,899 mm	+12% 11800 (DT)
Height, over the cab declared	110.6 in · 2,810 mm	109.2 in · 2,774 mm	—
Ground clearance declared	18.0 in · 457 mm	18.0 in · 457 mm	—
Fuel tank declared	200.8 qt · 190.0 L	182.8 qt · 173.0 L	+10% 11800 (DT)

Source

Source