- Rigid chassis
- WhichTractor size: Standard-size
- Not independently tested
- 1993–1995
It sits on the utility/standard-size boundary, so either size is a fair description. WhichTractor size, not the maker’s category
Derived by WhichTractor from a sourced three-point linkage. How we decide what a machine is
Massey Ferguson MF 3075 (A) Full specifications
Perkins 1004-4 THR2 four-cylinder diesel. The manufacturer claimed 93.7 horsepower. No laboratory has tested one, so there is no measured figure at the shaft.
Engine power, claimed · gross or net not stated
93.7 hp
69.9 kW as stated by the source
Not independently tested
Claimed · standard not stated by the source
Source · Traktorenlexikon, “Massey Ferguson MF 3075”, claimed
- Weight
- 9,733 lb
- 3-point lift
- 11,023 lb
- Hyd. flow
- 13.2 gpm
- Top speed
- 18.6–24.9 mph
Massey Ferguson MF 3075 (A) specs: key facts
The Massey Ferguson MF 3075 (A) was built from 1993 to 1995.
The Massey Ferguson MF 3075 (A) has a claimed engine power (gross or net not stated) of 69.9 kW (93.7 hp); it has no measured PTO figure.
The Massey Ferguson MF 3075 (A) was built in two-wheel drive (2WD) and four-wheel drive (4WD) versions, depending on configuration.
The Massey Ferguson MF 3075 (A) has a Perkins 1004-4 THR2 engine, a 4-cylinder 3.99 L diesel unit.
The Massey Ferguson MF 3075 (A) weighs 4,415 kg (9,733 lb) unladen.
The Massey Ferguson MF 3075 (A) has an independent rear PTO running at 540/1000 rpm.
The three-point hitch of the Massey Ferguson MF 3075 (A) lifts 5,000 kg (11,023 lb) at the lower-link ends.
The hydraulic pump of the Massey Ferguson MF 3075 (A) delivers 49.9 L/min (13.2 gpm).
Source · Traktorenlexikon, “Massey Ferguson MF 3075”
How much horsepower does an MF 3075 (A) have?
The only figure for the MF 3075 (A) is 93.7 hp (69.9 kW) of claimed engine power, gross or net not stated, no test standard stated — not power at the shaft.
Source · Traktorenlexikon, “Massey Ferguson MF 3075”
What engine is in an MF 3075 (A)?
An MF 3075 (A) has a Perkins 1004-4 THR2, a 4-cylinder 3.99 L diesel engine.
| Make & model | Perkins 1004-4 THR2 |
|---|---|
| Cylinders | 4, liquid-cooled |
| Displacement | 243.5 ci · 3.99 L |
| Max torque | 261 lb·ft · 354 N·m @ 1,456 rpm |
| Electrical system | 12 V |
Source · Traktorenlexikon, “Massey Ferguson MF 3075”
How much will an MF 3075 (A) lift, and what is its hydraulic flow?
An MF 3075 (A) lifts 11,023 lb (5,000 kg) at the lower-link ends of its Category 2 three-point hitch.
| Pump flow | 13.2 gpm · 49.9 L/min |
|---|---|
| Pressure | 2,277–2,350 psi · 157–162 bar |
| Hitch category | Category 2 |
| Lift at ends | 11,023 lb · 5,000 kg |
| Rear PTO | Independent, engine-driven, 540/1000 rpm @ 1,976 engine rpmEngages under load |
Source · Traktorenlexikon, “Massey Ferguson MF 3075”
What transmission does an MF 3075 (A) have?
Transmission specifications for the MF 3075 (A) are below.
| Clutch | Pedal-operated, dry and air-cooled VALEO single-plate clutch |
|---|---|
| Top speed | 18.6–24.9 mph · 30–40 km/hthe article lists alternatives |
Source · Traktorenlexikon, “Massey Ferguson MF 3075”
How much does an MF 3075 (A) weigh?
An MF 3075 (A) weighs 9,733 lb (4,415 kg) unladen.
| Unladen weight | 9,733 lb · 4,415 kgA |
|---|---|
| Wheelbase | 100.5 in · 2,553 mmA |
| Length | 179.6 in · 4,562 mm |
| Width | 80.7 in · 2,049 mm |
| Height | 108.2 in · 2,749 mm |
| Ground clearance | 16.9 in · 430 mm |
| Front track | 60.7–84.8 in · 1,543–2,153 mmtwo-wheel-drive version |
| Rear track | 60.6–84.5 in · 1,540–2,146 mm |
Source · Traktorenlexikon, “Massey Ferguson MF 3075”
Which tractors compare with an MF 3075 (A)?
Within 10% of its 86.1 hp at the PTO (claimed), the same type, and first built within 15 years of it.
- Case-IH MX 10086.1 hp PTO, claimed · 1997–2002Side by side with the MF 3075 (A) →
- Hürlimann H-496 Turbo (A)86.2 hp PTO, claimed · 1984–1989Side by side with the MF 3075 (A) →
- Deutz-Fahr AgroPrima 4.5686 hp PTO, claimed · 1991–1995Side by side with the MF 3075 (A) →
- SAME Silver 100.6 DT85.8 hp PTO, claimed · 1995–2004Side by side with the MF 3075 (A) →
- Ford 771086.5 hp PTO, claimed · 1981–1991Side by side with the MF 3075 (A) →
- ZETOR 1164186.6 hp PTO, claimed · 1999–2002Side by side with the MF 3075 (A) →
Everything else people ask
Is an MF 3075 (A) two-wheel drive or four-wheel drive?
The Massey Ferguson MF 3075 (A) was built in two-wheel drive (2WD) and four-wheel drive (4WD) versions, depending on configuration.
What PTO does an MF 3075 (A) have?
An MF 3075 (A) has a independent 540/1000 rpm rear PTO.
Where this page comes from
Compiled from Traktorenlexikon, “Massey Ferguson MF 3075”.
Sources
Facts taken from these documents, units converted. Numbers beside a figure refer to this list. Licences and attribution
- Traktorenlexikon: Massey Ferguson MF 3075 — CC BY-SA 4.0, WIKIBOOKS-TL-87083 · revision 992185. Wikibooks contributors (Traktorenlexikon). Original document