• Rigid chassis
  • WhichTractor size: Standard-size
  • Not independently tested
  • 1991–2007

It was ranked on an engine power figure whose source does not say gross or net. WhichTractor size, not the maker’s category

Derived by WhichTractor from a sourced three-point linkage. How we decide what a machine is

VALMET 6400-4 Full specifications

VALMET 420 DS/420 DW/420 DWRE/44 ET four-cylinder diesel. The manufacturer claimed 93.7 horsepower. No laboratory has tested one, so there is no measured figure at the shaft.

Engine power, claimed · gross or net not stated

93.7 hp

69.9 kW as stated by the source

Not independently tested

Claimed · standard not stated by the source

Source · Traktorenlexikon, “Valmet 6400”, claimed

Weight
9,259 lb
Hyd. flow
18.0 gpm
Top speed
18.6–24.9 mph

VALMET 6400-4 specs: key facts

  • The VALMET 6400-4 was built from 1991 to 2007.

  • The VALMET 6400-4 has a claimed engine power (gross or net not stated) of 69.9 kW (93.7 hp); it has no measured PTO figure.

  • The VALMET 6400-4 is four-wheel drive (4WD).

  • The VALMET 6400-4 has a VALMET 420 DS/420 DW/420 DWRE/44 ET engine, a 4-cylinder 4.40 L diesel unit.

  • The VALMET 6400-4 weighs 4,200 kg (9,259 lb) unladen.

  • The VALMET 6400-4 has a rear PTO running at 540/1000 rpm.

  • The hydraulic pump of the VALMET 6400-4 delivers 68.2 L/min (18.0 gpm).

Source · Traktorenlexikon, “Valmet 6400”

How much horsepower does a 6400-4 have?

The only figure for the 6400-4 is 93.7 hp (69.9 kW) of claimed engine power, gross or net not stated, no test standard stated — not power at the shaft.

Engine, claimed (gross/net not stated)
93.7 hp

Source · Traktorenlexikon, “Valmet 6400”

What engine is in a 6400-4?

A 6400-4 has a VALMET 420 DS/420 DW/420 DWRE/44 ET, a 4-cylinder 4.40 L diesel engine.

Engine — 6400-4 engine specifications
Make & modelVALMET 420 DS/420 DW/420 DWRE/44 ET
Cylinders4, liquid-cooled
Displacement268.3 ci · 4.40 L
Electrical system12 V

Source · Traktorenlexikon, “Valmet 6400”

How much will a 6400-4 lift, and what is its hydraulic flow?

Hydraulic and PTO specifications for the 6400-4 are below.

Hydraulics & PTO — 6400-4 hydraulics and PTO specifications
Pump flow18.0 gpm · 68.2 L/min
Hitch categoryCategory 2
Rear PTO540/1000 rpm

Source · Traktorenlexikon, “Valmet 6400”

What transmission does a 6400-4 have?

Transmission specifications for the 6400-4 are below.

Transmission — 6400-4 transmission specifications
ClutchPedal-operated dry single-plate clutch
SteeringHydrostatic Danfoss steering
Top speed18.6–24.9 mph · 30–40 km/hthe article lists alternatives

Source · Traktorenlexikon, “Valmet 6400”

How much does a 6400-4 weigh?

A 6400-4 weighs 9,259 lb (4,200 kg) unladen.

Weights & dimensions — 6400-4 weights and dimensions
Unladen weight9,259 lb · 4,200 kg
Maximum permissible mass16,535 lb · 7,500 kg
Maximum front axle load6,614 lb · 3,000 kg
Maximum rear axle load11,354 lb · 5,150 kg
Wheelbase91.6 in · 2,326 mm
Length173.5 in · 4,408 mm
Width78.1 in · 1,985 mm
Height107.7 in · 2,735 mm
Ground clearance18.1 in · 460 mm
Front track59.6–77.6 in · 1,515–1,970 mm
Rear track63.4–83.3 in · 1,610–2,115 mm
Turning radius, braked13.8 ft · 4.20 m

Source · Traktorenlexikon, “Valmet 6400”

Which tractors compare with a 6400-4?

Within 10% of its 93.7 hp of claimed engine power, the same type, and first built within 15 years of it.

Everything else people ask

Is a 6400-4 two-wheel drive or four-wheel drive?

The VALMET 6400-4 is four-wheel drive (4WD).

What PTO does a 6400-4 have?

A 6400-4 has a 540/1000 rpm rear PTO.

Where this page comes from

Compiled from Traktorenlexikon, “Valmet 6400”.

Last verified

Not yet verified

Spotted an error?

Sources

Facts taken from these documents, units converted. Numbers beside a figure refer to this list. Licences and attribution

  1. Traktorenlexikon: Valmet 6400CC BY-SA 4.0, WIKIBOOKS-TL-116468 · revision 1023838. Wikibooks contributors (Traktorenlexikon). Original document