- Rigid chassis
- WhichTractor size: Standard-size
- Not independently tested
- 1993–1995
It sits on the utility/standard-size boundary, so either size is a fair description. WhichTractor size, not the maker’s category
Massey Ferguson MF 3075 (A) Hydraulics & PTO specifications
13 hydraulics and PTO values on record for the MF 3075 (A).
Engine power, claimed · gross or net not stated
93.7 hp
69.9 kW as stated by the source
Not independently tested
Claimed · standard not stated by the source
Source · Traktorenlexikon, “Massey Ferguson MF 3075”, claimed
How much will an MF 3075 (A) lift?
An MF 3075 (A) lifts 11,023 lb (5,000 kg) at the lower-link ends.
| Pump flow | 13.2 gpm · 49.9 L/min |
|---|---|
| Hydraulic pressure | 2,277–2,350 psi · 157–162 bar |
| Rear remote valves, optional | 3 |
| Three-point hitch category | Category 2 |
| Lift capacity at ball ends | 11,023 lb · 5,000 kg |
| Front hitch available, optional | Yes |
Source · Traktorenlexikon, “Massey Ferguson MF 3075”
What PTO does an MF 3075 (A) have?
An MF 3075 (A) has a 540/1000 rpm rear PTO.
| Rear PTO drive | Engine-driven |
|---|---|
| Rear PTO independence | Independent |
| PTO engages under load | Yes |
| Rear PTO speeds | 540/1000 rpm |
| Engine speed at 540 PTO | 1,976 rpm |
| Front PTO available, optional | Yes |
| PTO power, claimed | 86.1 hp · 64.2 kWClaimed; standard not stated by the source |
Source · Traktorenlexikon, “Massey Ferguson MF 3075”
Where this page comes from
13 hydraulics and PTO values from Traktorenlexikon, “Massey Ferguson MF 3075”.
Sources
Facts taken from these documents, units converted. Numbers beside a figure refer to this list. Licences and attribution
- Traktorenlexikon: Massey Ferguson MF 3075 — CC BY-SA 4.0, WIKIBOOKS-TL-87083 · revision 992185. Wikibooks contributors (Traktorenlexikon). Original document