13 material differences

Tractor oneFiat L 95 (DT)1996–1998No measured PTO figureTractor twoMassey Ferguson MF 3075 (A)1993–1995No measured PTO figure

Which should you choose?

Read our verdict on the L 95 (DT) and the MF 3075 (A) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

13 material differences · 3 fields identical or within 5%, which is not counted as material

Fiat L 95 (DT) and Massey Ferguson MF 3075 (A), field by field
Field	L 95 (DT)	MF 3075 (A)	Gap
Engine
Engine power, claimed claimed	93.7 hp	93.7 hp	—
Engine declared	Fiat-Iveco 8045.25 K	Perkins 1004-4 THR2	differs
Displacement declared	3.91 L	3.99 L	—
Maximum torque declared	209 lb·ft · 284 N·m	261 lb·ft · 354 N·m	+25% MF 3075 (A)
Transmission
Top speed declared	18.6–24.9 mph · 30–40 km/h	18.6–24.9 mph · 30–40 km/h	—
Clutch declared	—	Pedal-operated, dry and air-cooled VALEO single-plate clutch	—
Hydraulics & hitch
Pump flow declared	15.9 gpm · 60.0 L/min	13.2 gpm · 49.9 L/min	+20% L 95 (DT)
Pressure declared	2,103–2,466 psi · 145–170 bar	2,277–2,350 psi · 157–162 bar	differs
Three-point lift, at the coupling points declared	9,259 lb · 4,200 kg	11,023 lb · 5,000 kg	+19% MF 3075 (A)
Rear PTO speeds declared	540/540E/1000 rpm	540/1000 rpm	differs
Weight & dimensions
Unladen weight declared	7,496 lb · 3,400 kg	9,733 lb · 4,415 kg	+30% MF 3075 (A)
Maximum permissible mass declared	13,228 lb · 6,000 kg	—	—
Wheelbase declared	92.2 in · 2,342 mm	100.5 in · 2,553 mm	+9% MF 3075 (A)
Length declared	157.5 in · 4,000 mm	179.6 in · 4,562 mm	+14% MF 3075 (A)
Width declared	79.5–105.7 in · 2,020–2,685 mm	80.7 in · 2,049 mm	differs
Height, over the cab declared	100.4 in · 2,550 mm	108.2 in · 2,749 mm	+8% MF 3075 (A)
Ground clearance declared	19.7 in · 500 mm	16.9 in · 430 mm	+16% L 95 (DT)
Turning radius, braked declared	13.9 ft · 4.25 m	—	—
Fuel tank declared	121.5 qt · 115.0 L	200.8 qt · 190.0 L	+65% MF 3075 (A)

Source

Source