8 material differences · fewer than 12

Tractor oneMassey Ferguson MF 3075 (A)1993–1995No measured PTO figureTractor twoVALMET 6400-41991–2007No measured PTO figure

Which should you choose?

Read our verdict on the MF 3075 (A) and the 6400-4 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

8 material differences · 6 fields identical or within 5%, which is not counted as material

Massey Ferguson MF 3075 (A) and VALMET 6400-4, field by field
Field	MF 3075 (A)	6400-4	Gap
Engine
Engine power, claimed claimed	93.7 hp	93.7 hp	—
Engine declared	Perkins 1004-4 THR2	VALMET 420 DS/420 DW/420 DWRE/44 ET	differs
Displacement declared	3.99 L	4.40 L	+10% 6400-4
Maximum torque declared	261 lb·ft · 354 N·m	—	—
Transmission
Top speed declared	18.6–24.9 mph · 30–40 km/h	18.6–24.9 mph · 30–40 km/h	—
Clutch declared	Pedal-operated, dry and air-cooled VALEO single-plate clutch	Pedal-operated dry single-plate clutch	differs
Hydraulics & hitch
Pump flow declared	13.2 gpm · 49.9 L/min	18.0 gpm · 68.2 L/min	+37% 6400-4
Pressure declared	2,277–2,350 psi · 157–162 bar	—	—
Rear PTO speeds declared	540/1000 rpm	540/1000 rpm	—
Weight & dimensions
Unladen weight declared	9,733 lb · 4,415 kg	9,259 lb · 4,200 kg	—
Maximum permissible mass declared	—	16,535 lb · 7,500 kg	—
Wheelbase declared	100.5 in · 2,553 mm	91.6 in · 2,326 mm	+10% MF 3075 (A)
Length declared	179.6 in · 4,562 mm	173.5 in · 4,408 mm	—
Width declared	80.7 in · 2,049 mm	78.1–101.8 in · 1,985–2,585 mm	differs
Height, over the cab declared	108.2 in · 2,749 mm	107.7 in · 2,735 mm	—
Ground clearance declared	16.9 in · 430 mm	18.1 in · 460 mm	+7% 6400-4
Turning radius, braked declared	—	13.8 ft · 4.20 m	—
Fuel tank declared	200.8 qt · 190.0 L	174.4 qt · 165.0 L	+15% MF 3075 (A)

Source

Source