6 material differences · fewer than 12
Tractor oneMassey Ferguson MF 11021970–1976No measured PTO figureTractor twoRenault 951-41974–1977No measured PTO figure
Which should you choose?
Read our verdict on the MF 1102 and the 951-4 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
6 material differences · 6 fields identical or within 5%, which is not counted as material
| Field | MF 1102 | 951-4 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 93.7 hp | 93.7 hp | — |
| Engine declared | Eicher EDK 6 or EDK 6-3 | MWM D 227-6 | differs |
| Displacement declared | 5.90 L | 5.66 L | — |
| Maximum torque declared | — | 246 lb·ft · 334 N·m | — |
| Transmission | |||
| Top speed declared | 18.6 mph · 30 km/h | 15.5 mph · 25 km/h | +20% MF 1102 |
| Clutch declared | Dry Fichtel & Sachs double clutch | Dry LuK double clutch | differs |
| Hydraulics & hitch | |||
| Pump flow declared | 10.6 gpm · 40.0 L/min | 8.7 gpm · 32.8 L/min | +22% MF 1102 |
| Pressure declared | — | 2,321 psi · 160 bar | — |
| Rear PTO speeds declared | 540/1000 rpm | 540/1000 rpm | — |
| Weight & dimensions | |||
| Unladen weight declared | 9,259 lb · 4,200 kg | 9,469 lb · 4,295 kg | — |
| Maximum permissible mass declared | 14,330 lb · 6,500 kg | — | — |
| Wheelbase declared | 106.2 in · 2,698 mm | 105.6 in · 2,683 mm | — |
| Length declared | 160.6 in · 4,080 mm | 174.9 in · 4,442 mm | +9% 951-4 |
| Width declared | 82.3 in · 2,090 mm | 79.5–96.7 in · 2,020–2,455 mm | differs |
| Ground clearance declared | 17.7 in · 450 mm | 17.9 in · 455 mm | — |
| Turning radius, braked declared | 19.0 ft · 5.80 m | — | — |
| Fuel tank declared | — | 123.6 qt · 117.0 L | — |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Massey Ferguson MF 1102 sources
- Source: Traktorenlexikon, “Massey Ferguson MF 1102”
Renault 951-4 sources
- Source: Traktorenlexikon, “Renault 951-4 R7644”
- Source: Traktorenlexikon, “Renault 891 R7681”