10 material differences · fewer than 12
Tractor oneMassey Ferguson MF 11021970–1976No measured PTO figureTractor twoSOMECA 1000 (TD)1971–1977No measured PTO figure
Which should you choose?
Read our verdict on the MF 1102 and the 1000 (TD) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
10 material differences · 3 fields identical or within 5%, which is not counted as material
| Field | MF 1102 | 1000 (TD) | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 93.7 hp | 93.7 hp | — |
| Engine declared | Eicher EDK 6 or EDK 6-3 | FIAT-IVECO 8065.02.007 | differs |
| Displacement declared | 5.90 L | 5.18 L | +14% MF 1102 |
| Maximum torque declared | — | 226 lb·ft · 306 N·m | — |
| Transmission | |||
| Top speed declared | 18.6 mph · 30 km/h | 15.5 mph · 25 km/h | +20% MF 1102 |
| Clutch declared | Dry Fichtel & Sachs double clutch | Pedal operated two stage dry FERODO double clutch | differs |
| Hydraulics & hitch | |||
| Pump flow declared | 10.6 gpm · 40.0 L/min | 12.3 gpm · 46.5 L/min | +16% 1000 (TD) |
| Rear PTO speeds declared | 540/1000 rpm | 540/1000 rpm | — |
| Weight & dimensions | |||
| Unladen weight declared | 9,259 lb · 4,200 kg | 7,771 lb · 3,525 kg | +19% MF 1102 |
| Maximum permissible mass declared | 14,330 lb · 6,500 kg | — | — |
| Wheelbase declared | 106.2 in · 2,698 mm | 97.6 in · 2,480 mm | +9% MF 1102 |
| Length declared | 160.6 in · 4,080 mm | 164.2 in · 4,170 mm | — |
| Width declared | 82.3 in · 2,090 mm | 78.7–99.7 in · 1,998–2,532 mm | differs |
| Ground clearance declared | 17.7 in · 450 mm | 22.5 in · 571 mm | +27% 1000 (TD) |
| Turning radius, braked declared | 19.0 ft · 5.80 m | 12.5 ft · 3.81 m | +52% MF 1102 |
| Fuel tank declared | — | 124.7 qt · 118.0 L | — |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Massey Ferguson MF 1102 sources
- Source: Traktorenlexikon, “Massey Ferguson MF 1102”
SOMECA 1000 (TD) sources
- Source: Traktorenlexikon, “Someca 1000”
- Source: Traktorenlexikon, “Fiat 1000/1000 DT”