9 material differences · fewer than 12
Tractor oneALLIS-CHALMERS 2001972–1975No measured PTO figureTractor twoMassey Ferguson MF 11021970–1976No measured PTO figure
Which should you choose?
Read our verdict on the 200 and the MF 1102 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
9 material differences · 4 fields identical or within 5%, which is not counted as material
| Field | 200 | MF 1102 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 93.7 hp | 93.7 hp | — |
| Engine declared | ALLIS-CHALMERS D-2900 | Eicher EDK 6 or EDK 6-3 | differs |
| Displacement declared | 4.93 L | 5.90 L | +20% MF 1102 |
| Transmission | |||
| Top speed declared | 15.5 mph · 25 km/h | 18.6 mph · 30 km/h | +20% MF 1102 |
| Clutch declared | — | Dry Fichtel & Sachs double clutch | — |
| Hydraulics & hitch | |||
| Hydraulic centre declared | Open centre | — | — |
| Pump flow declared | 17.2 gpm · 65.1 L/min | 10.6 gpm · 40.0 L/min | +63% 200 |
| Rear PTO speeds declared | 540 rpm / 1000 rpm | 540/1000 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 8,845 lb · 4,012 kg | 9,259 lb · 4,200 kg | — |
| Maximum permissible mass declared | — | 14,330 lb · 6,500 kg | — |
| Wheelbase declared | 105.7 in · 2,686 mm | 106.2 in · 2,698 mm | — |
| Length declared | 157.5 in · 4,000 mm | 160.6 in · 4,080 mm | — |
| Width declared | 87.6 in · 2,226 mm | 82.3 in · 2,090 mm | +7% 200 |
| Height, over the steering wheel declared | 86.7 in · 2,202 mm | 67.9 in · 1,725 mm | +28% 200 |
| Ground clearance declared | 21.4 in · 543 mm | 17.7 in · 450 mm | +21% 200 |
| Turning radius, braked declared | 11.1 ft · 3.38 m | 19.0 ft · 5.80 m | +72% MF 1102 |
| Fuel tank declared | 192.0 qt · 181.7 L | — | — |
ALLIS-CHALMERS 200 sources
Source
- Source: Traktorenlexikon, “Allis-Chalmers 200”
- Source: Traktorenlexikon, “Allis-Chalmers 190XT”
Massey Ferguson MF 1102 sources
Source
- Source: Traktorenlexikon, “Massey Ferguson MF 1102”