- Rigid chassis
- WhichTractor size: Utility
- Not independently tested
- 1988–2000
WhichTractor size, not the maker’s category
Derived by WhichTractor from a sourced three-point linkage. How we decide what a machine is
Landini R-7860 (DT) TL-20 N/M (TL-20 DT/M) Full specifications
Perkins LD 4.236 four-cylinder diesel. The manufacturer claimed 70.0 horsepower. No laboratory has tested one, so there is no measured figure at the shaft.
Engine power, claimed · gross or net not stated
70.0 hp
52.2 kW as stated by the source
Not independently tested
Claimed · standard not stated by the source
Source · Traktorenlexikon, “Landini 7860”, claimed
- Weight
- 6,305 lb
- 3-point lift
- 4,698 lb
- Hyd. flow
- 9.8 gpm
- Top speed
- 18.6 mph
Landini R-7860 (DT) TL-20 N/M (TL-20 DT/M) specs: key facts
The Landini R-7860 (DT) TL-20 N/M (TL-20 DT/M) was built from 1988 to 2000.
The Landini R-7860 (DT) TL-20 N/M (TL-20 DT/M) has a claimed engine power (gross or net not stated) of 52.2 kW (70.0 hp); it has no measured PTO figure.
The Landini R-7860 (DT) TL-20 N/M (TL-20 DT/M) was offered in two-wheel-drive and four-wheel-drive versions.
The Landini R-7860 (DT) TL-20 N/M (TL-20 DT/M) has a Perkins LD 4.236 engine, a 4-cylinder 3.87 L diesel unit.Source 2
The Landini R-7860 (DT) TL-20 N/M (TL-20 DT/M) weighs 2,860 kg (6,305 lb) unladen.
The Landini R-7860 (DT) TL-20 N/M (TL-20 DT/M) has an independent rear PTO running at 540/1000 rpm.
The three-point hitch of the Landini R-7860 (DT) TL-20 N/M (TL-20 DT/M) lifts 2,131 kg (4,698 lb) at the lower-link ends.
The hydraulic pump of the Landini R-7860 (DT) TL-20 N/M (TL-20 DT/M) delivers 37.2 L/min (9.8 gpm).
Source · Traktorenlexikon, “Landini 7860”
How much horsepower does a R-7860 (DT) TL-20 N/M (TL-20 DT/M) have?
The only figure for the R-7860 (DT) TL-20 N/M (TL-20 DT/M) is 70.0 hp (52.2 kW) of claimed engine power, gross or net not stated, no test standard stated — not power at the shaft.
Source · Traktorenlexikon, “Landini 7860”
What engine is in a R-7860 (DT) TL-20 N/M (TL-20 DT/M)?
A R-7860 (DT) TL-20 N/M (TL-20 DT/M) has a Perkins LD 4.236, a 4-cylinder 3.87 L diesel engine.
| Make & model | Perkins LD 4.236Source 2 |
|---|---|
| Cylinders | 4, liquid-cooledSource 2 |
| Displacement | 236.0 ci · 3.87 LSource 2 |
| Max torque | 195 lb·ft · 264 N·m @ 1,249 rpm |
| Injection | Direct injection |
| Electrical system | 12 V |
Source · Traktorenlexikon, “Landini 7860”
How much will a R-7860 (DT) TL-20 N/M (TL-20 DT/M) lift, and what is its hydraulic flow?
A R-7860 (DT) TL-20 N/M (TL-20 DT/M) lifts 4,698 lb (2,131 kg) at the lower-link ends.
| Pump flow | 9.8 gpm · 37.2 L/min |
|---|---|
| Pressure | 2,756 psi · 190 bar |
| Lift at ends | 4,698 lb · 2,131 kg |
| Rear PTO | Independent, engine-driven, 540/1000 rpm @ 1,944 engine rpmGround-speed PTO available |
| PTO shaft | 1 3/8"- 6 splines (Form-1) |
Source · Traktorenlexikon, “Landini 7860”
What transmission does a R-7860 (DT) TL-20 N/M (TL-20 DT/M) have?
Transmission specifications for the R-7860 (DT) TL-20 N/M (TL-20 DT/M) are below.
| Clutch | Dry and air-cooled OMG double clutch |
|---|---|
| Brakes | Pedal-operated, hydraulically wet SIRMAC disc brake acting on the differential side shafts |
| Steering | Hydrostatic DANFOSS steering, type: ORBITROL-OSPC 80 with separate oil circuit |
| Top speed | 18.6 mph · 30 km/h |
Source · Traktorenlexikon, “Landini 7860”
How much does a R-7860 (DT) TL-20 N/M (TL-20 DT/M) weigh?
A R-7860 (DT) TL-20 N/M (TL-20 DT/M) weighs 6,305 lb (2,860 kg) unladen.
| Unladen weight | 6,305 lb · 2,860 kgDT: 3,065 |
|---|---|
| Wheelbase | 89.8 in · 2,281 mmDT: 2,257 |
| Length | 146.1 in · 3,710 mmDT: 3,800 |
| Width | 78.3 in · 1,990 mm |
| Height | 94.3 in · 2,395 mm |
| Ground clearance | 20.3 in · 515 mmDT: 410 |
| Front track | 55.9–75.6 in · 1,420–1,920 mmDT: 1,500-2,048 |
| Rear track | 59.3–79.0 in · 1,506–2,006 mm |
| Turning radius, braked | 13.0 ft · 3.96 mDT: 4,130 |
Source · Traktorenlexikon, “Landini 7860”
Which tractors compare with a R-7860 (DT) TL-20 N/M (TL-20 DT/M)?
Within 10% of its 60.5 hp at the PTO (claimed), the same type, and first built within 15 years of it.
- Massey Ferguson MF 383 (A)60.5 hp PTO, claimed · 1987–1994Side by side with the R-7860 (DT) TL-20 N/M (TL-20 DT/M) →
- John Deere 5400 (A)60.6 hp PTO, claimed · 1992–1997Side by side with the R-7860 (DT) TL-20 N/M (TL-20 DT/M) →
- VALMET 505/505-460.3 hp PTO, claimed · 1983–1989Side by side with the R-7860 (DT) TL-20 N/M (TL-20 DT/M) →
- VALMET 6000-460.3 hp PTO, claimed · 1993–1996Side by side with the R-7860 (DT) TL-20 N/M (TL-20 DT/M) →
- VOLVO-BM-VALMET Volvo 50560.3 hp PTO, claimed · 1983–1985Side by side with the R-7860 (DT) TL-20 N/M (TL-20 DT/M) →
- ZETOR 6321/6341 Super60.6 hp PTO, claimed · 1997–2004Side by side with the R-7860 (DT) TL-20 N/M (TL-20 DT/M) →
Everything else people ask
Is a R-7860 (DT) TL-20 N/M (TL-20 DT/M) two-wheel drive or four-wheel drive?
The Landini R-7860 (DT) TL-20 N/M (TL-20 DT/M) was offered in two-wheel-drive and four-wheel-drive versions.
What PTO does a R-7860 (DT) TL-20 N/M (TL-20 DT/M) have?
A R-7860 (DT) TL-20 N/M (TL-20 DT/M) has a independent 540/1000 rpm rear PTO on a 1 3/8"- 6 splines (Form-1) shaft.
Where this page comes from
Compiled from Traktorenlexikon, “Landini 7860”; and Traktorenlexikon, “Massey Ferguson MF 373”.
Sources
Facts taken from these documents, units converted. Numbers beside a figure refer to this list. Licences and attribution
- Traktorenlexikon: Landini 7860 — CC BY-SA 4.0, WIKIBOOKS-TL-113006 · revision 991537. Wikibooks contributors (Traktorenlexikon). Original document
- Traktorenlexikon: Massey Ferguson MF 373 — CC BY-SA 4.0, WIKIBOOKS-TL-70481 · revision 992172. Wikibooks contributors (Traktorenlexikon). Original document